T150

From Geekworm Wiki
Revision as of 14:05, 22 July 2023 by Harry (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

T150 V1.0 Front
T150 V1.0 Back
T150 with SSD
T150 Installation
T150 Installation
T150 Packing List

Overview

The T150 is a M.2 NGFF SATA SSD storage expansion board specially designed for NVIDIA Jetson nano developer kit, it supports up to 2TB M.2 NGFF SSD solid-state drive (SSD), allowing you to expand your storage with high-speed SSD drives on Jetson Nano. Now it is time to build a mobile hard disk with a M.2 NGFF SATA SSD for your Jetson Nano.

How to boot the rootfs from external drive: https://www.jetsonhacks.com/2019/04/25/jetson-nano-run-on-usb-drive/

Features

  • Ideal storage solution for Jetson Nano - M.2 NGFF SATA SSD Shield
  • For Use with Jetson Nano 2GB/4GB
  • Support up to 2TB M.2 NGFF SSD solid-state drive
  • Support M.2 B Key NGFF SSD 2242/2260/2280 length(Must find proper screws to fix SSD with 2242/2260 length)
  • Supports USB Attached SCSI Protocol (UASP)
  • Specially-made USB3.1 jumper to connect with Jetson Nano- no cable needed!
  • USB bus-powered- No PSU needed
  • Integrated USB 3.1 Gen1 to SATA 6Gb/s bridge controller
  • Integrated high efficiency step-Down Converter, 3.3V max 4A to power the SSD
  • With SSD LED blue indicator
  • PCB Size:100x80mm/39.37x31.49inch

How to Power

  • Power via DC 5V Barrel jack of Jetson Nano developer kit (Recommend)
  • Power via Micro-USB 5V port of Jetson Nano developer kit

Packing List

  • 1x T150 M2 SATA SSD Expansion Board
  • 4x M2.5x11mm F/F Spacers
  • 8x M2.5x6mm Screws
  • 1x M2x4mm Screw (fix SSD)
  • 1x Screw Driver

User Manual

Add your comment
Geekworm Wiki welcomes all comments. If you do not want to be anonymous, register or log in. It is free.