8,941
edits
Changes
no edit summary
{{GD Template Impl}}
[[File:USB-Solar-Panel-Battery-Regulator-1.jpg|thumb|Solar Panel Battery Regulator Controller]]
[[File:USB-Solar-Panel-Battery-Regulator-2.jpg|thumb|Solar Panel Battery Regulator Controller]]
[[File:USB-Solar-Panel-Battery-Regulator-3.jpg|thumb|Solar Panel Battery Regulator Controller]]
==Safety instruction==
* Make sure your battery has enough voltage for the controller to recognize the battery type before first installation.
* The battery cable should be as short as possible to minimize loss.
* The regulator is only suitable for Lead Acid Batteries: OPEN,AGM, GEL. It is not suited for Nickel Metal Hydride, Lithium Ions or Other Batteries.
* The charge regulator is only suitable for regulating solar modules. Never connect another charging source to the charge regulator.
==Features ==
* Build-in industrial micro controller.
* Big LCD display,all adjustable parameter.
* Fully 3-stage PWM charge management.
* Build-in short-circuit protections,open-circuit protections,reverse protections,over-load protections.
* Dual USB output
* Dual MOS Reverse current protections ,low heat productions.
== Parameters==
* Size:App 150*78*35mm
* Rated Voltage: 12V 24V Auto
* Current: 30A
* Standby current:<10mA
* USB Output Voltage:5V/3A
* Operating temperature:35~+60℃
* Application:Camping/Hiking
* With Timer and light sensor,it could work for solar light system.
== Connection==
# Connect the battery to the charge regulator plus and minus.it will show 1 ,if it detects 12V battery, 2 if it detects 24V battery.
# Connect the photovoltaic module to the regulator plus and minus.
# Connect the consumer to the charge regulator plus and minus. The reverse order applies when deinstalling! An improper sequence order can damage the controller!
==Note==
# Only For offGrid PV Solar System.
# For 10A 12V Pv System: 120W Solar Panel,12V Leadacid Battery,21V for Max input Voltage
# For 10A 24V Pv System: 240W Solar Panel,24V Leadacid Battery,42V for Max input Voltage
[[File:USB-Solar-Panel-Battery-Regulator-5.JPG]]
==Documents==
[['''User Manual''']|http://www.raspberrypiwiki.com/index.php/File:Manual-EN.jpg]]
[[Category:Consumer Electronics]]
[[Category:Product Manual]]
<comments/>
[[File:USB-Solar-Panel-Battery-Regulator-1.jpg|thumb|Solar Panel Battery Regulator Controller]]
[[File:USB-Solar-Panel-Battery-Regulator-2.jpg|thumb|Solar Panel Battery Regulator Controller]]
[[File:USB-Solar-Panel-Battery-Regulator-3.jpg|thumb|Solar Panel Battery Regulator Controller]]
==Safety instruction==
* Make sure your battery has enough voltage for the controller to recognize the battery type before first installation.
* The battery cable should be as short as possible to minimize loss.
* The regulator is only suitable for Lead Acid Batteries: OPEN,AGM, GEL. It is not suited for Nickel Metal Hydride, Lithium Ions or Other Batteries.
* The charge regulator is only suitable for regulating solar modules. Never connect another charging source to the charge regulator.
==Features ==
* Build-in industrial micro controller.
* Big LCD display,all adjustable parameter.
* Fully 3-stage PWM charge management.
* Build-in short-circuit protections,open-circuit protections,reverse protections,over-load protections.
* Dual USB output
* Dual MOS Reverse current protections ,low heat productions.
== Parameters==
* Size:App 150*78*35mm
* Rated Voltage: 12V 24V Auto
* Current: 30A
* Standby current:<10mA
* USB Output Voltage:5V/3A
* Operating temperature:35~+60℃
* Application:Camping/Hiking
* With Timer and light sensor,it could work for solar light system.
== Connection==
# Connect the battery to the charge regulator plus and minus.it will show 1 ,if it detects 12V battery, 2 if it detects 24V battery.
# Connect the photovoltaic module to the regulator plus and minus.
# Connect the consumer to the charge regulator plus and minus. The reverse order applies when deinstalling! An improper sequence order can damage the controller!
==Note==
# Only For offGrid PV Solar System.
# For 10A 12V Pv System: 120W Solar Panel,12V Leadacid Battery,21V for Max input Voltage
# For 10A 24V Pv System: 240W Solar Panel,24V Leadacid Battery,42V for Max input Voltage
[[File:USB-Solar-Panel-Battery-Regulator-5.JPG]]
==Documents==
[['''User Manual''']|http://www.raspberrypiwiki.com/index.php/File:Manual-EN.jpg]]
[[Category:Consumer Electronics]]
[[Category:Product Manual]]
<comments/>