Raspberry Pi Zero Camera

From Geekworm Wiki
Jump to navigation Jump to search
Raspberry Pi Zero Canera sku:447589

Raspberry Pi Zero Canera sku:447589

Overview

It' s a customized mini camera for Raspberry Pi Zero V1.3

With the small size, it can be integrated with RPi Zero into any application that has high command of demension.

Feature:

  • Interface: CSI
  • 5 Megapixel OV5647 sensor
  • Max. Resolution: 2592 x 1944
  • Support 1080p30, 720p60, and 640x480p60/ 90 video
  • CCD Dimension: 1/4 inch
  • Diagonal: 72.4 degree
  • Sensor best solution: 720p,1080p
  • Dimension: 60mm x 11.5mm x 5mm

How to connect the hardware

Plumb to connect the FFC with the connector(the one right beside the HDMI interface). The contact face to the HDMI interface when connection.

Remove the protective film before using the lens.

Beware of ESD damage and static electricity when use the bare board.

How to use the software

RPi raspi-config and firmware have been updated to the camera. Execute apt-get update and apt-get upgrade

Select camera in raspi-config, start up camera driver in RPI, and then boost

Perform the command-line procedure raspivid and raspistill to operate the camera, capture video clips or images

Play via mplayer about the captured video clips

Packing List

  • 1 x Pi Zero Camera Module
Add your comment
Geekworm Wiki welcomes all comments. If you do not want to be anonymous, register or log in. It is free.