Open main menu

Raspberry Pi Model A+ 512M

Revision as of 16:28, 1 September 2018 by Admin (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Raspberry Pi Model A+ (sku:441855)

Raspberry Pi Model A+ (sku:441855)
Raspberry Pi Model A+ package (sku:441855)


Overview

Raspberry pi model A+ (512M) The Model A+ is the low-cost variant of the Raspberry Pi. It replaced the original Model A in November 2014. Compared to the Model A it has:

  • More GPIO. The GPIO header has grown to 40 pins, while retaining the same pinout for the first 26 pins as the Model A and B.
  • Micro SD. The old friction-fit SD card socket has been replaced with a much nicer push-push micro SD version.
  • Lower power consumption. By replacing linear regulators with switching ones we’ve reduced power consumption by between 0.5W and 1W.
  • Better audio. The audio circuit incorporates a dedicated low-noise power supply.
  • Smaller, neater form factor. We’ve aligned the USB connector with the board edge, moved composite video onto the 3.5mm jack, and added four squarely-placed mounting holes. Model A+ is approximately 2cm shorter than the Model A.

We recommend the Model A+ for for embedded projects and projects which require very low power, and which do not require Ethernet or multiple USB ports.

  official website

  Raspberry Pi Model A+ 256M

Features

  • Silicon manufacturer: Broadcom
  • Core architecture: ARM11
  • Silicon-core: BCM2835
  • Bits: 32-bit
  • 700MHz, VideoCore, IV, Multimedia, Co-processor, 512MB RAM, 1 x HDMI, 1 x USB Port

Document

  documentation

Add your comment
Geekworm Wiki welcomes all comments. If you do not want to be anonymous, register or log in. It is free.