8,941
edits
Changes
no edit summary
[[File:IMG 4777-Main.jpg|right|thumb|Rpi UPSPack]]
{{GD Template Impl}}
[[File:IMG 4780.jpg|right|thumb|Rpi UPSPack]]
[[File:IMG 4778.jpg|right|thumb|Rpi UPSPack]]
[[File:IMG 4781.jpg|right|thumb|Rpi UPSPack]]
== Instruction ==
* Support charge while discharge, it will not affect the output of UPS power supply when external power outage.
* Two power modes: Outdoor portable model and Indoor UPS power supply mode:
* As an outdoor portable power supply, the motherboard is powered by a lithium battery, and the maximum external power supply capacity is 5.1V, 2.5A.
* As an indoor UPS power supply mode: MicroUSB plugs into a normal 5V,2A power adapter, and the external output interface(USB-A interface) can output a maximum of 5.1A, 3A
* 4+2LED to shows charger and discharger, battery power status
* Protect function, The external output port has a self-recovery fuse to prevent the raspberry pi from being burnt due to an external short circuit.
* Two output modes, except for the regular output via USB port. At high currents, such as for high loads above 2.5A, the voltage drop across the USB cable is a problem that cannot be ignored. Therefore, we provide a 2.54mm header, which is welded at the Raspberry Pi GPIO 5V interface for direct power supply, to minimize the cable damaged and pressure drop.
== UPS Hat Specification ==
* Size: 8.5cm x 5.5cm x 0.9cm
* Weight: 35g
[[File:Raspberry Pi UPS Hat 01.jpg|800px]]
[[File:Raspberry Pi UPS Hat 02.jpg|800px]]
[[File:Raspberry Pi UPS Hat 03.jpg|800px]]
[[File:Raspberry Pi UPS Hat 04.jpg|800px]]
[[File:Raspberry Pi UPS Hat 05.jpg|800px]]
<comments/>
[[Category:Product Manual]]
[[Category:Raspberry pi]]
{{GD Template Impl}}
[[File:IMG 4780.jpg|right|thumb|Rpi UPSPack]]
[[File:IMG 4778.jpg|right|thumb|Rpi UPSPack]]
[[File:IMG 4781.jpg|right|thumb|Rpi UPSPack]]
== Instruction ==
* Support charge while discharge, it will not affect the output of UPS power supply when external power outage.
* Two power modes: Outdoor portable model and Indoor UPS power supply mode:
* As an outdoor portable power supply, the motherboard is powered by a lithium battery, and the maximum external power supply capacity is 5.1V, 2.5A.
* As an indoor UPS power supply mode: MicroUSB plugs into a normal 5V,2A power adapter, and the external output interface(USB-A interface) can output a maximum of 5.1A, 3A
* 4+2LED to shows charger and discharger, battery power status
* Protect function, The external output port has a self-recovery fuse to prevent the raspberry pi from being burnt due to an external short circuit.
* Two output modes, except for the regular output via USB port. At high currents, such as for high loads above 2.5A, the voltage drop across the USB cable is a problem that cannot be ignored. Therefore, we provide a 2.54mm header, which is welded at the Raspberry Pi GPIO 5V interface for direct power supply, to minimize the cable damaged and pressure drop.
== UPS Hat Specification ==
* Size: 8.5cm x 5.5cm x 0.9cm
* Weight: 35g
[[File:Raspberry Pi UPS Hat 01.jpg|800px]]
[[File:Raspberry Pi UPS Hat 02.jpg|800px]]
[[File:Raspberry Pi UPS Hat 03.jpg|800px]]
[[File:Raspberry Pi UPS Hat 04.jpg|800px]]
[[File:Raspberry Pi UPS Hat 05.jpg|800px]]
<comments/>
[[Category:Product Manual]]
[[Category:Raspberry pi]]