8,941
edits
Changes
no edit summary
[[File:IMG_1035-01.jpg|thumb|right|Raspberry Pi IR-CUT Camera sku:450888]]
{{GD Template Impl}}
[[File:IMG_1038-03.jpg|thumb|right|Raspberry Pi IR-CUT Camera sku:450888]]
== Introduction ==
The IR-CUT Camera is compatible with all generations of Raspberry Pi(Pi 3 Model B/ Pi 2B/ B+/ A+/ Zero), available at both day and night.
== Features ==
* Compatible with any generations of Raspberry Pi.
* With built-in IR-CUT, it can fix the chromatic aberration problem when use in day, and has better image.
* Support IR night vision with the IR Fill light.
* Support adjustable focusing.
== How to toggle working mode? ==
Tow working mode: normal mode and night mode;
The default working mode is normal model for RPi IR-CUT.
Run command:
sudo nano /boot/config.txt
append the following line at the end of file:
disable_camera_led=1
save and reboot, then the camera working on night mode;
if you want to restore to normal node, only you need to comment the line:
#disable_camera_led=1
You can program GPIO to toggle the working mode.
high - normal mode
low - night mode
== Parameter ==
* 5 Megapixel
* CCD Dimension: 1/4 inch
* Aperture (F) : 1.8
* Focal Length: 2.6mm (Adjustable)
* Sensor best solution: 1080p
* 4 screw holes: used for both attachment;
Support 3.3V power supply;
Support infrared LED and fill flash.
* Dimension: 31mm x 32 mm
== Packing List ==
* 1 x RPi IR-CUT Camera
* 1 x 16 PIN FFC (reverse)
== Document ==
The CMOS: [[File:OV5647-Sensor.pdf]]
[[Category:Product Manual]]
[[Category:Raspberry pi]]
<comments/>
{{GD Template Impl}}
[[File:IMG_1038-03.jpg|thumb|right|Raspberry Pi IR-CUT Camera sku:450888]]
== Introduction ==
The IR-CUT Camera is compatible with all generations of Raspberry Pi(Pi 3 Model B/ Pi 2B/ B+/ A+/ Zero), available at both day and night.
== Features ==
* Compatible with any generations of Raspberry Pi.
* With built-in IR-CUT, it can fix the chromatic aberration problem when use in day, and has better image.
* Support IR night vision with the IR Fill light.
* Support adjustable focusing.
== How to toggle working mode? ==
Tow working mode: normal mode and night mode;
The default working mode is normal model for RPi IR-CUT.
Run command:
sudo nano /boot/config.txt
append the following line at the end of file:
disable_camera_led=1
save and reboot, then the camera working on night mode;
if you want to restore to normal node, only you need to comment the line:
#disable_camera_led=1
You can program GPIO to toggle the working mode.
high - normal mode
low - night mode
== Parameter ==
* 5 Megapixel
* CCD Dimension: 1/4 inch
* Aperture (F) : 1.8
* Focal Length: 2.6mm (Adjustable)
* Sensor best solution: 1080p
* 4 screw holes: used for both attachment;
Support 3.3V power supply;
Support infrared LED and fill flash.
* Dimension: 31mm x 32 mm
== Packing List ==
* 1 x RPi IR-CUT Camera
* 1 x 16 PIN FFC (reverse)
== Document ==
The CMOS: [[File:OV5647-Sensor.pdf]]
[[Category:Product Manual]]
[[Category:Raspberry pi]]
<comments/>