RAB Holder

From Geekworm Wiki
Revision as of 09:01, 25 June 2021 by Cindy (talk | contribs) (→‎Packin List)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Arduino RAB Holder
Arduino RAB Holder
Arduino RAB Holder

Overview

  • This RAB Holder is not only compatible with Raspberry Pi 3 B+ / Raspberry Pi 3 Model B / 2 Model B / B+, but also suitable for Arduino Uno, Mega2560, 400 Tie-Point and 830 Point breadboards.
  • Access to all consumer ports: TF cards, HDMI and USB cords
  • Portable,easy to move, carry, this RAB holder is stable to fixed on the table for your needs.
  • Excellent Tool in Education and DIY project.

Features

RAB-HOLDER-W800.jpg

RAB-Holder-2.jpg

Packin List

  • 1 x RAB Holder
  • 8 x M2.5*5 Screws
  • 1 x Screw Driver

Note: The Raspberry Pi motherboard, Arduino UNO R3 mother board, Arduino Mega 2560 Motherboard,the breadboard are all not included.

Installation Guide

Installaton video: https://youtu.be/t0VPtxi-rFY

Add your comment
Geekworm Wiki welcomes all comments. If you do not want to be anonymous, register or log in. It is free.