5,154
edits
Changes
* You can post a issue ticket at [https://geekworm.com/community/forum/topic/78220/pikvm-faq Geekworm forum] or email to us (support@geekworm.com) and attached your installation pictures or videos to get some help.
* Blog sharing for reference: https://www.andysblog.de/kvm-over-ip-pikvm-als-bausatz
</pre>
3c is a hexadecimal number, it is the I2C address of OLED, if you can’t find this value, please shut down and reconnect X630-A3&OLED and run this commandagain, If you still can't find the OLED's I2C address, the OLED screen may be damaged.
4. Then run the following command to enable OLED display:
systemctl enable --now kvmd-oled
ro
'''Q. I want to control several pc power. Is it possible with one PiKVM-A3 and several x630-a5'''
A. No, one kit can only control one pc.
'''Q. There is a I2S Audio In on X630-A3, does the packing list contain an I2S cable? How to connect it?'''
A. No contain an I2S cable.
PiKVM OS does not support I2S, so it cannot be used yet.
The 10pin SH1.0 connector is for '''future''' I2S HDMI audio support. Once it supported, we will update the product information for detail use.
'''Q: How to login?'''
A: Input the XX.XX.XX.XX ip address on the explorer, then input user: admin, the default password is 'admin' also.
'''Q: How to switch root user?'''
A:
su root
#default password is root also