5,150
edits
Changes
Jump to navigation
Jump to search
no edit summary
#REDIRECT [[RPiKVM]]
{{GD Template Impl}}
[[File:X630-A3-IMG-4235.jpg|thumb|right|X630+X630-A3]]
[[File:X630-A3-IMG-4237.jpg|thumb|right|X630+X630-A3]]
[[File:X630-IMG-2718.jpg|thumb|right|X630 HDMI to CSI-2 Module]]
[[File:X630-A3-IMG-4205.jpg|thumb|right|X630-A3]]
[[File:X630-A5-IMG-4210-2.jpg|thumb|right|X630-A5]]
==Overview==
RPiKVM (https://pikvm.org/) is a very powerful and Open Source Software which allows for a remote connection via your Raspberry Pi to turn on/off or restart your computer, configure the UEFI/BIOS, and even reinstall the OS using the Virtual CD-ROM or Flash Drive. You can use your remote keyboard and mouse or PiKVM can simulate a keyboard, mouse, and a monitor, which are then presented in a web browser as if you were working on a remote system directly. It's true hardware-level access with no dependency on any remote ports, protocols or services!
[[File:PIKWM-Real.jpg|300px|RPIKVM]]
==Features==
* Designed especially for PiKVM ( Raspberry Pi based KVM over IP)
* Works with the latest Raspberry Pi 4B
* Fully compatiblie with PiKVM OS
* Control a server and computer using a web browser
* HDMI Full HD capture based on the TC358743 chip
* OTG Keyboard & mouse; Mass Storage Drive emulation
* Hardware Real Time Clock (RTC) with CR1220 coin battery socket
* Equipped with cooling fan that allows the heat from your Raspberry Pi to dissipate
* Equipped with solidstate relays to protect RPi GPIO pins from computer and ESD spikes
* ATX control via RJ45 connector Switch the machine on or off, reset it, and monitor the status of HDD LED & power LED remotely
* Reserves the 10pin SH1.0 connector for future I2S HDMI audio support
* Reserves the 4pin header & spacers for I2C OLED display
* Reserves the 40pin header that can be stacked with other Raspberry Pi accessory boards
==How to Power RPIKVM==
* Power Input: 5.1Vdc +/-5% , ≥3A (Power Via USB Type-C port of X630-A3)
==Packing List==
* '''1 x X630 HDMI to CSI-2 Module'''
* 1 x FPC Cable(5cm length)
* 4 x KM2.5*6 Screws
* '''1 x X630-A3 V1.2 Expansion Board'''
* 1 x USB-A to USB-C OTG Cable (Cable Length: 100cm / 39.37 inch)
* 4 x F/F M2.5*20 Spacers
* 8 x M2.5*5 Screws
* '''1 x X630-A5 V1.0 Adapter Board'''
* 4 x 2pin Female to Female Dupont Cables (Cable Length: 47cm / 18.50 inch)
* '''1 x 0.96 inch OLED'''
==User Manual==
Hardware
[[File:X630-A3-Interface.jpg|500px|X630-A3]]
Wiring Diagram
[[File:RPIKVM-Connection.jpg|500px|RPIKVM]]
<!--Add review function! -->
<comments />
<!--Please choose the -->
<!--Remove other categories, just keep the appropriate categories -->
[[Category:Product Manual]]
[[Category:Raspberry pi]]