5,154
edits
Changes
==Overview==
PiKVM <ref>PiKVM © belongs to https://pikvm.org</ref> (https://pikvm.org/) is a very powerful and Open Source Software which allows for a remote connection via your Raspberry Pi to turn on/off or restart your computer, configure the UEFI/BIOS, and even reinstall the OS using the Virtual CD-ROM or Flash Drive. You can use your remote keyboard and mouse or PiKVM can simulate a keyboard, mouse, and a monitor, which are then presented in a web browser as if you were working on a remote system directly. It's true hardware-level access with no dependency on any remote ports, protocols or services!
'''Geekworm PiKVM KVM family products:'''
{| class="wikitable"
! Model !! Compatible with !! Work with X630 !! Remark
|-
| [[PiKVM-A3|KVM-A3]] || Raspberry Pi 4 Model B || YES ||
|-
| [[PiKVM-A8|KVM-A8]] || Raspberry Pi 4 Model B || YES || '''PCIe version''', No external wire
|-
| [[PiKVM-A4|KVM-A4]] || Raspberry Pi zero 2 W || YES ||
|-
| [[X650]] || Raspberry Pi Computer Module 4 (CM4) || NO || '''PCIe version'''
|-
| [[X652]] || Raspberry Pi Computer Module 4 (CM4) || NO || '''PCIe version''', PoE Power&NVMe SSD supported
|-
| [[X680]] || Raspberry Pi Compute Module 4 (CM4) || NO || '''Can control up to 4 USB HDMI computers/servers'''
|}
<!--
'''PS:''' PiKVM-A3 is also compatible with Raspberry Pi 3 B+ / 3B, but since Pi3 without OTG interface, when PiKVM-A3 is used with Pi3, OTG analog keyboard and mouse cannot be used.
-->
<span class="tb_red">'''About after-sales service:'''</span>
The after-sales service of all products sold by Geekworm should be the responsibility of our Geekworm team (email: '''support@geekworm.com'''), please do not disturb the official PiKVM after-sales team.
'''Some Resource:'''
* [https://docs.pikvm.org/ Official Document]
* [https://docs.pikvm.org/faq/ Official FAQ]
* [https://pikvm.org/download/ PiKVM OS download]
==FAQReferences==* First of all, we recommend you to get more FAQ information on the official website: [https://docs.pikvm.org/faq/ official FAQ], or check the following FAQ;* You can post a issue ticket at [https://geekworm.com/community/forum/topic/78220/pikvm-faq Geekworm forum] or email to us (support@geekworm.com) and attached your installation pictures or videos to get some help.* Blog sharing for reference: https://www.andysblog.de/kvm-over-ip-pikvm-als-bausatz <span style="color:red;font-weight:bold">Q: Why is the X650 not working?<references /span> A: 1. First you need to make sure your physical connection is correct, or you can email us at support@geekworm.com to confirm your physical connection; 2. Make sure to use the right pikvm OS. [[File:Pi4-V3-HAT.png|800px]] 3. Make sure CM4 is tightly connected with X650. (This is very important, and this error often occurs) [[File:X650-IMG-5605-2.jpg|800px]] '''Q: How to switch to root user?''' A: run the following command: su rootThen type the password, the default password is 'root' also. Q: Does the x650 support audio? A: Yes. Refer to [[Enable pikvm hdmi audio]] Q: Does the x650 support OLED display? A: Yes. please contact us at mail: support@geekworm.com， But we actually think OLED displays are pointless '''Q: How to enable RTC?''' A: Firstly, insert the C1220 button battery.run the following command: rw sudo nano /boot/config.txt #Then change the line: '''dtoverlay=i2c-rtc,pcf8563''' to '''dtoverlay=i2c-rtc,ds1307''' #Test RTC #Display the current time of the Raspberry Pi date #Write the time of Raspberry Pi to DS1307 sudo hwclock -w #Read the time of DS1307 sudo hwclock -r ro
<!--Add review function! -->