Changes

[[File:KVM01-X630-A3A8-IMG-44024966-main.jpg|thumb|right|X630+X630-A3+KVM-A3 Case for Pi4]][[File:X630-A3-IMG-42351.jpg|thumb|right|X630+X630PiKVM-A3A8]][[File:X630KVM-A3-IMG-4237.jpg|thumb|right|X630+X6304402-A3]][[File:X630-IMG-2718main.jpg|thumb|right|X630 HDMI to CSI-2 Module]][[File:X630-A3-V1.3-ACCE.jpg|thumb|right|X630-A3 V1.3 Packing List]][[File:X863PiKVM-A3-ACCE.jpg|thumb|right|X630-A3 V1.2 Packing List]][[File:X630-A4-Acc.jpg|thumb|right|X630-A4 Packing List]][[File:X630-A5-acc.jpg|thumb|right|X630-A5 Packing List]][[File:X630-A5a4-IMG-4210-2.jpg|thumb|right|X630-A5]][[File:X630-A8-IMG-4948.jpg|thumb|right|X630-A8-Front]][[File:X630-A8-IMG-4949.jpg|thumb|right|X630-A8-Rear]][[File:X630-A8-Standard-height-PCIe-bracket.jpg|thumb|right|X630-A8 Standard height PCIe Add-in Card I/O Bracket]][[File:X630+X630-A3+X630-A5+0.96寸OLED+Ethernet4552.jpg|thumb|right|PiKVM-A3: X630+X630-A3+X630-A5+OLED for Pi 4]][[File:X630+X630-A4+X630-A5+0.96OLED+Ethernet.jpg|thumb|right|PiKVM-A4: X630+X630-A4+X630-A5+OLED for Pi Zero 2 W / Zero W]][[File:01-X630-A8-acce.jpg|thumb|right|PiKVM-A8: X630+X630-A8 for Pi 4]]

PiKVM <ref>PiKVM © belongs to https://pikvm.org</ref> (https://pikvm.org/) is a very powerful and Open Source Software which allows for a remote connection via your Raspberry Pi to turn on/off or restart your computer, configure the UEFI/BIOS, and even reinstall the OS using the Virtual CD-ROM or Flash Drive. You can use your remote keyboard and mouse or PiKVM can simulate a keyboard, mouse, and a monitor, which are then presented in a web browser as if you were working on a remote system directly. It's true hardware-level access with no dependency on any remote ports, protocols or services!

'''PiKVM Geekworm KVM family products:'''

| [[PiKVM-A3 |KVM-A3]] || Raspberry Pi 4 Model B || YES || |-| [[PiKVM-A8|KVM-A8]] || Raspberry Pi 4 Model B || YES || '''PCIe version''', No external wire|-| [[PiKVM-A4|KVM-A4]] || Raspberry Pi zero 2 W || YES || |-| [[X650]] || Raspberry Pi Computer Module 4 (CM4) || NO || '''PCIe version'''

| PiKVM-A8 [[X652]] || Raspberry Pi Computer Module 4 Model B (CM4) || YES NO || '''PCIe version''', No external wirePoE Power&NVMe SSD supported

| PiKVM-A4 [[X680]] || Raspberry Pi zero 2 W Compute Module 4 (CM4) || YES NO || '''Can control up to 4 USB HDMI computers/servers'''

==PiKVM-A3==Refer to [[PiKVM-A3]]==PiKVM-A4==Refer to [[PiKVM-A4]] ==PiKVM-A8=====How to Power===* POE power* Power Input: 5.1Vdc +/-5% , ≥3A (Power Via USB TypeThe after-C port sales service of X630-A8) ===How to Cool===[[X630-A8]] (PiKVM-A8 PCIe version) equipped with a active cooling fan that cool your raspberry pi; ===Packing List==='''* 1 x X630 HDMI to CSI-2 Module''' * * 1 x FPC cable (Length: 5cm) * * 4 x M2.5x6mm Screws '''* 1 x X630-A8 V1.7 Expansion Board''' * * 1 x FPC cable (Length: 5cm) * * 1 x ATX Control Cable (Length: 52cm) * * 1 x Motherboard Internal USB 2.0 9-pin Female Header to TYPE-C USB OTG Cable (Length: 50cm) * * 1 x USB3.0 IDC to TYPE-C (Length: 45cm) * * 1 x Standard height PCIe Add-in Card I/O Bracket* * 4 x M2.5x12mm F/F Spacers* * 8 x M2.5x6mm Screws'''* 1x X630-A8-CAB V1.1 Camera Adapter board''' * * 2 x PM3x6mm Screws'''* 1 X HDMI cable (30cm length)''' ==Hardware Parameters=====Physics Connection===[[File:X630-A3-Interface-700px.jpg|frame|none| '''PiKVM-A3 Physics Connection: Pi 4 + X630-A3 + X630''']][[File:X630-A4-Interface-700px.jpg|frame|none| '''PiKVM-A4 Physics Connection: Pi Zero 2 W + X630-A4 + X630''']][[File:X630-A5-IMG-4214-700px.jpg|frame|none| '''X630-A5 Adapter board''']][[File:X630-A8-IMG-4942-Interface-700px.jpg|frame|none| '''PiKVM-A8 Physics Connection: Pi 4 + X630-A8 + X630''']] ===Connection Diagram===[[File:PiKVM-A3A4-Connection.jpg|700px|PIKVM-A3 PiKVM-A4]] Note:# The X630-A5 adapter board will all products sold by Geekworm should be install into the PC Case.# The wire group ① connect to X630-A5 comes from the PANEL responsibility of PC Case.#The black and red wiresour Geekworm team (wire group ②) come from X630-A5 accessories. ==Installation Video==PiKVM-A3 Kitemail: https://youtu.be/KrpHCsK7veA (Note: the X630-A3 V1.2 has been updated to X630-V1.3 and remove one on-board spacer to simplify the installation.) {{#ev:youtube|https://youtu.be/KrpHCsK7veA}}PiKVM-A4 Kit: https://youtu.be/a2oYTEh7QC0 {{#ev:youtube|https://youtu.be/a2oYTEh7QC0}} ==User Manual=====Software Guide===Download here: https://pikvm.org/download/ For Raspberry Pi 4, please use the V3 HAT OS. [[File:Pi4-V3-HAT.png|800px|PIKVM V3HAT]] For Raspberry Pi Zero 2W/Zero W, please use the follow V2 OS.[[File:Pi-Zero-V2.png|none|PiKVM V2]]  Firstly, we recommend carefully reading official documentation from website: https://docs.pikvm.org/faq/. If you run into any issues you can check the following Q&A. If that still doesn't help you you're welcome to raise an issue ticket at https://geekworm.com/community/forum/topic/78220/pikvm-faq or email to us ('support@geekworm.com) (<span style="color:red;">Please be sure to provide installation pictures or videos to contact us, which can effectively solve the problem.Thanks.</span>) blog sharing for reference: https://www.andysblog.de/kvm-over-ip-pikvm-als-bausatz ==FAQ=='''Q. I want to control several pc power. Is it possible with one PiKVM-A3 and several x630-a5''' A. No), one kit can only control one pc.  '''Q. There is a I2S Audio In on X630-A3, does please do not disturb the packing list contain an I2S cable? How to connect it?''' A. No contain an I2S cable.  official PiKVM OS does not support I2S, so it cannot be used yet. The 10pin SH1.0 connector is for '''future''' I2S HDMI audio support. Once it supported, we will update the product information for detail use.  '''Q: How to login?''' A: Input the XX.XX.XX.XX ip address on the explorer, then input user: admin, the default password is 'admin' also.  '''Q: How to switch root user?''' A: su root #default password is root also  '''Q: How to enable OLED?''' A: Run the following command to enable OLED display: rw systemctl enable -after-now kvmd-oled ro  '''Q: Why OLED is not display?''' A: Please confirm that your OS is right: [[File:Pi4-V3-HAT.png|800px]]   '''Q: How to enable RTC?''' A: Firstly, insert the C1220 button battery.run the following command: rw sudo nano /boot/configsales team.txt #Then change the line: '''dtoverlay=i2c-rtc,pcf8563''' to '''dtoverlay=i2c-rtc,ds1307''' #Test RTC #Display the current time of the Raspberry Pi date #Write the time of Raspberry Pi to DS1307 sudo hwclock -w #Read the time of DS1307 sudo hwclock -r ro

'''QSome Resource: Why PiKVM-A3/A4 does not show the video?'''* [https://docs.pikvm.org/ Official Document]* [https://docs.pikvm.org/faq/ Official FAQ]* [https://pikvm.org/download/ PiKVM OS download]