Changes

[[File:X630-A3-IMG01-4235.jpg|thumb|right|X630+X630-A3]][[File:X630-A3-IMG-4237.jpg|thumb|right|X630+X630-A3]][[File:X630A8-IMG-2718.jpg|thumb|right|X630 HDMI to CSI4966-2 Module]][[File:X863main-A3-ACCE1.jpg|thumb|right|X630PiKVM-A3 Packing ListA8]][[File:X630-A5-acc.jpg|thumb|right|X630-A5 Packing List]][[File:X630KVM-A3-IMG-42054402-main.jpg|thumb|right|X630PiKVM-A3]][[File:X630-A5a4-IMG-4210-24552.jpg|thumb|right|X630PiKVM-A5A4]] 

PiKVM <ref>PiKVM © belongs to https://pikvm.org</ref> (https://pikvm.org/) is a very powerful and Open Source Software which allows for a remote connection via your Raspberry Pi to turn on/off or restart your computer, configure the UEFI/BIOS, and even reinstall the OS using the Virtual CD-ROM or Flash Drive. You can use your remote keyboard and mouse or PiKVM can simulate a keyboard, mouse, and a monitor, which are then presented in a web browser as if you were working on a remote system directly. It's true hardware-level access with no dependency on any remote ports, protocols or services! The KVM refers to Keyboard Video Mouse. The PiKVM kit is designed and based on Raspberry Pi 4 Model B, also support Raspberry Pi 3B/3B+, but the PiKVM case will only support Raspberry Pi 4. '''The PiKVM is composed of follow parts:'''* X630 HDMI to CSI-2 Module (for video capture)* X630-A3 Expansion Board (for ethernet, cooling, RTC, power in etc)* X630-A5 Adapter Board (it will be install into the PC case to connect with computer motherboard)* 0.96 inch OLED (for display)* Ethernet Cable (TIA/EIA-568.B) [[File:PIKWM-Real.jpg|800px|RPIKVM]] ==Features==* Designed especially for PiKVM ( Raspberry Pi based KVM over IP)* Works with the latest Raspberry Pi 4B* Fully compatiblie with PiKVM OS* Control a server and computer using a web browser* HDMI Full HD capture based on the TC358743 chip* OTG Keyboard & mouse; Mass Storage Drive emulation* Hardware Real Time Clock (RTC) with CR1220 coin battery socket* Equipped with cooling fan that allows the heat from your Raspberry Pi to dissipate* Equipped with solidstate relays to protect RPi GPIO pins from computer and ESD spikes* ATX control via RJ45 connector Switch the machine on or off, reset it, and monitor the status of HDD LED & power LED remotely* Reserves the 10pin SH1.0 connector for future I2S HDMI audio support* Reserves the 4pin header & spacers for I2C OLED display* Reserves the 40pin header that can be stacked with other Raspberry Pi accessory boards ==How to Power PiKVM==* Power Input: 5.1Vdc +/-5% , ≥3A (Power Via USB Type-C port of X630-A3) ==Packing List==*'''1 x 0.96 inch OLED'''*'''1 x Ethernet Cable'''*'''1 x X630 HDMI to CSI-2 Module'''** 1 x FPC Cable(5cm length)** 4 x KM2.5*6 Screws*'''1 x X630-A3 V1.2 Expansion Board'''** 1 x USB-A to USB-C OTG Cable (Cable Length: 100cm / 39.37 inch)** 4 x F/F M2.5*20 Spacers** 7 x M2.5*5 Screws** 1 x M2.5*10 Screws*'''1 x X630-A5 V1.0 Adapter Board'''** M3.5*6 Screw** 4 x 2pin Female to Female Dupont Cables (Cable Length: 47cm / 18.50 inch)

[[File'''Geekworm KVM family products:X630-A3-Interface.jpg|800px|X630-A3]]'''

{| class===Wiring Diagram==="wikitable"! Model !! Compatible with !! Work with X630 !! Remark|-| [[PiKVM-A3|KVM-A3]] || Raspberry Pi 4 Model B || YES || |-| [[PiKVM-A8|KVM-A8]] || Raspberry Pi 4 Model B || YES || '''PCIe version''', No external wire|-| [[PiKVM-A4|KVM-A4]] || Raspberry Pi zero 2 W || YES || |-| [[X650]] || Raspberry Pi Computer Module 4 (CM4) || NO || '''PCIe version'''|-| [[X652]] || Raspberry Pi Computer Module 4 (CM4) || NO || '''PCIe version''', PoE Power&NVMe SSD supported|-| [[X680]] || Raspberry Pi Compute Module 4 (CM4) || NO || '''Can control up to 4 USB HDMI computers/servers'''|}

[[File<!--'''PS:''' PiKVM-ConnectionA3 is also compatible with Raspberry Pi 3 B+ / 3B, but since Pi3 without OTG interface, when PiKVM-1A3 is used with Pi3, OTG analog keyboard and mouse cannot be used.jpg|800px|PIKVM]]-->

Note<span class="tb_red">'''About after-sales service:'''</span>

# The X630after-A5 adapter board will sales service of all products sold by Geekworm should be install into the PC Case.# The wire group ① connect to X630-A5 comes from the PANEL responsibility of PC Caseour Geekworm team (email: '''support@geekworm.#The black and red wires(wire group ②com''') come from X630, please do not disturb the official PiKVM after-A5 accessoriessales team.

(<span style="color'''Some Resource:red;">Use ASUS for example, different computers maybe different<'''* [https://docs.pikvm.org/ Official Document]* [https://docs.pikvm.org/faq/ Official FAQ]* [https://pikvm.org/download/span>)PiKVM OS download]