Changes

[[File:X630-A301-IMG-4235.jpg|thumb|right|X630+X630-A3]][[File:X630-A3A8-IMG-4237.jpg|thumb|right|X630+X630-A3]][[File:X6304966-IMGmain-27181.jpg|thumb|right|X630 HDMI to CSIPiKVM-2 ModuleA8]][[File:X630KVM-A3-IMG-42054402-main.jpg|thumb|right|X630PiKVM-A3]][[File:X630-A5a4-IMG-4210-24552.jpg|thumb|right|X630PiKVM-A5A4]]

PiKVM <ref>PiKVM © belongs to https://pikvm.org</ref> (https://pikvm.org/) is a very powerful and Open Source Software which allows for a remote connection via your Raspberry Pi to turn on/off or restart your computer, configure the UEFI/BIOS, and even reinstall the OS using the Virtual CD-ROM or Flash Drive. You can use your remote keyboard and mouse or PiKVM can simulate a keyboard, mouse, and a monitor, which are then presented in a web browser as if you were working on a remote system directly. It's true hardware-level access with no dependency on any remote ports, protocols or services!

The PiKVM is composed of follow parts'''Geekworm KVM family products:* X630 HDMI to CSI-2 Module (for video capture)* X630-A3 Expansion Board (for ethernet, cooling, RTC, power in etc)* X630-A5 Adapter Board (it will be install into the PC case to connect with computer motherboard)* 0.96 inch OLED (for display)* Ethernet Cable (TIA/EIA-568.B)'''

{| class="wikitable"! Model !! Compatible with !! Work with X630 !! Remark|-| [[PiKVM-A3|KVM-A3]] || Raspberry Pi 4 Model B || YES || |-| [[PiKVM-A8|KVM-A8]] || Raspberry Pi 4 Model B || YES || '''PCIe version''', No external wire|-| [[PiKVM-A4|KVM-A4]] || Raspberry Pi zero 2 W || YES || |-| [[File:PIKWMX650]] || Raspberry Pi Computer Module 4 (CM4) || NO || '''PCIe version'''|-Real.jpg|800px[[X652]] || Raspberry Pi Computer Module 4 (CM4) || NO || '''PCIe version''', PoE Power&NVMe SSD supported|-|RPIKVM[[X680]]|| Raspberry Pi Compute Module 4 (CM4) || NO || '''Can control up to 4 USB HDMI computers/servers'''|}

==Features==<!--* Designed especially for '''PS:''' PiKVM ( Raspberry Pi based KVM over IP)* Works -A3 is also compatible with the latest Raspberry Pi 4B* Fully compatiblie with 3 B+ / 3B, but since Pi3 without OTG interface, when PiKVM OS* Control a server and computer using a web browser* HDMI Full HD capture based on the TC358743 chip* OTG Keyboard & mouse; Mass Storage Drive emulation* Hardware Real Time Clock (RTC) with CR1220 coin battery socket* Equipped -A3 is used with cooling fan that allows the heat from your Raspberry Pi to dissipate* Equipped with solidstate relays to protect RPi GPIO pins from computer and ESD spikes* ATX control via RJ45 connector Switch the machine on or off, reset itPi3, OTG analog keyboard and monitor the status of HDD LED & power LED remotely* Reserves the 10pin SH1mouse cannot be used.0 connector for future I2S HDMI audio support* Reserves the 4pin header & spacers for I2C OLED display* Reserves the 40pin header that can be stacked with other Raspberry Pi accessory boards-->

<span class==How to Power PIKVM==* Power Input"tb_red">'''About after-sales service: 5.1Vdc +'''</-5% , ≥3A (Power Via USB Type-C port of X630-A3)span>

==Packing List==* '''1 x X630 HDMI to CSIThe after-2 Module'''* 1 x FPC Cablesales service of all products sold by Geekworm should be the responsibility of our Geekworm team (5cm length)* 4 x KM2.5*6 Screws* email: '''1 x X630-A3 V1support@geekworm.2 Expansion Boardcom'''* 1 x USB-A to USB-C OTG Cable (Cable Length: 100cm / 39.37 inch)* 4 x F/F M2.5*20 Spacers* 8 x M2.5*5 Screws* '''1 x X630, please do not disturb the official PiKVM after-A5 V1.0 Adapter Board'''* 4 x 2pin Female to Female Dupont Cables (Cable Length: 47cm / 18.50 inch)* '''1 x 0sales team.96 inch OLED'''*'''1 x Ethernet Cable'''

'''Some Resource:'''* [https://docs.pikvm.org/ Official Document]* [Filehttps:X630-A3-Interface//docs.jpg|800px|X630-A3pikvm.org/faq/ Official FAQ]* [https://pikvm.org/download/ PiKVM OS download]

Wiring Diagram==References== [[File:RPIKVM-Connection.jpg|800px|PIKVM]] Note: # The X630-A5 adapter board will be install into the PC Case.# The wire group ① connect to X630-A5 comes from the PANEL of PC Case.#The black and red wires(wire group ②) come from X630-A5 accessories. Wiring of computer front panel IO socket [[File:Panel-Connection.jpg|800px|PC Panel]]<references />