Open main menu

ESP8266 Nodemcu wifi development board
NodeMcu Lua ESP8266 sku:436861



ESP8266 is a highly integrated chip designed for the needs of a new connected world.

It offers a complete and self-contained Wi-Fi networking solution, allowing it to either host the application or to offload all Wi-Fi networking functions from another application processor.

  • WINDOWS driver USB to serial CH341 / CH340 installation package
  • Support WINDOWS 98 / ME / 2000 / XP / Server 2003 / VISTA / Server 2008 / Win7 / Win8 / Win8.1 32 Bit / 64 and MAC
  • Through Microsoft's digital signature authentication
  • In the computer end of the USB device emulation as a standard serial devices Serial COM
  • It contains the serial number and identification CH34X monitoring CH34X equipment swap library.


  • Wireless 802.11 b / g / n standard
  • Support STA / AP / STA + AP three operating modes
  • Built-in TCP / IP protocol stack to support multiple TCP Client connections (5 MAX)D0 ~ D8, SD1 ~ SD3: used as GPIO, PWM, IIC, etc., port driver capability 15mAAD0: 1 channel ADC Power input: 4.5V~9V (10VMAX), USB-powered
  • Current: continuous transmission: ≈70mA (200mA MAX), Standby: <200uA
  • Transfer rate: 110-460800bps
  • Support UART / GPIO data communication interface
  • Remote firmware upgrade (OTA)Support Smart Link Smart Networking
  • Working temperature: -40 ℃ ~ + 125 ℃
  • Drive Type: Dual high-power H-bridge driver

Instruction & Steps of How to use:

1. Download the Arduino IDE, the latest version.

2. Install the IDE

3. Set up your Arduino IDE as:

Go to File->Preferences and copy the URL below to get the ESP board manager extensions:

4. Go to Tools > Board > Board Manager> Type "esp8266" and download the Community esp8266 and install.

5. Set up your chip as:

  • Tools -> Board -> NodeMCU 1.0 (ESP-12E Module)
  • Tools -> Flash Size -> 4M (3M SPIFFS)
  • Tools -> CPU Frequency -> 80 Mhz
  • Tools -> Upload Speed -> 921600
  • Tools-->Port--> (whatever it is)

6. Download and run the 32 bit flasher exe at Github(Search for nodemcu/nodemcu-flasher/tree/master/ at Github) Or download and run the 64 bit flasher exe at:

7. In Arduino IDE, look for the old fashioned Blink program. Load, compile and upload.

8. Go to FILE> EXAMPLES> ESP8266> BLINK, it will start blinking.

Data download and firmware link

Data download access to the website: :

Firmware link:

Add your comment
Geekworm Wiki welcomes all comments. If you do not want to be anonymous, register or log in. It is free.