8,941
edits
Changes
no edit summary
{{GD Template Impl}}
[[File:esp8266-IMG-3168.jpg|thumb|ESP8266 Nodemcu wifi development board]]
[[File:ESP8266.jpg|right|thumb|NodeMcu Lua ESP8266 sku:436861]]
== overviews:==
ESP8266 is a highly integrated chip designed for the needs of a new connected world.
It offers a complete and self-contained Wi-Fi networking solution, allowing it to either host the application or to offload all Wi-Fi networking functions from another application processor.
* WINDOWS driver USB to serial CH341 / CH340 installation package
* Support WINDOWS 98 / ME / 2000 / XP / Server 2003 / VISTA / Server 2008 / Win7 / Win8 / Win8.1 32 Bit / 64 and MAC
* Through Microsoft's digital signature authentication
* In the computer end of the USB device emulation as a standard serial devices Serial COM
* It contains the serial number and identification CH34X monitoring CH34X equipment swap library.
==Feature:==
* Wireless 802.11 b / g / n standard
* Support STA / AP / STA + AP three operating modes
* Built-in TCP / IP protocol stack to support multiple TCP Client connections (5 MAX)D0 ~ D8, SD1 ~ SD3: used as GPIO, PWM, IIC, etc., port driver capability 15mAAD0: 1 channel ADC Power input: 4.5V~9V (10VMAX), USB-powered
* Current: continuous transmission: ≈70mA (200mA MAX), Standby: <200uA
* Transfer rate: 110-460800bps
* Support UART / GPIO data communication interface
* Remote firmware upgrade (OTA)Support Smart Link Smart Networking
* Working temperature: -40 ℃ ~ + 125 ℃
* Drive Type: Dual high-power H-bridge driver
==Instruction & Steps of How to use:==
1. Download the Arduino IDE, the latest version.
2. Install the IDE
3. Set up your Arduino IDE as:
Go to File->Preferences and copy the URL below to get the ESP board manager extensions: arduino.esp8266.com/stable/package_esp8266com_index.json
4. Go to Tools > Board > Board Manager> Type "esp8266" and download the Community esp8266 and install.
5. Set up your chip as:
* Tools -> Board -> NodeMCU 1.0 (ESP-12E Module)
* Tools -> Flash Size -> 4M (3M SPIFFS)
* Tools -> CPU Frequency -> 80 Mhz
* Tools -> Upload Speed -> 921600
* Tools-->Port--> (whatever it is)
6. Download and run the 32 bit flasher exe at Github(Search for nodemcu/nodemcu-flasher/tree/master/ at Github)github.com/nodemcu/nodemcu-flasher/tree/master/Win32/Release Or download and run the 64 bit flasher exe at:
github.com/nodemcu/nodemcu-flasher/tree/master/Win64/Release
7. In Arduino IDE, look for the old fashioned Blink program. Load, compile and upload.
8. Go to FILE> EXAMPLES> ESP8266> BLINK, it will start blinking.
== Data download and firmware link ==
Data download access to the website: : http://www.nodemcu.com/index_en.html
Firmware link: https://github.com/nodemcu/nodemcu-firmware
[[Category:ESP32]]
[[Category:Product Manual]]
<comments/>
[[File:esp8266-IMG-3168.jpg|thumb|ESP8266 Nodemcu wifi development board]]
[[File:ESP8266.jpg|right|thumb|NodeMcu Lua ESP8266 sku:436861]]
== overviews:==
ESP8266 is a highly integrated chip designed for the needs of a new connected world.
It offers a complete and self-contained Wi-Fi networking solution, allowing it to either host the application or to offload all Wi-Fi networking functions from another application processor.
* WINDOWS driver USB to serial CH341 / CH340 installation package
* Support WINDOWS 98 / ME / 2000 / XP / Server 2003 / VISTA / Server 2008 / Win7 / Win8 / Win8.1 32 Bit / 64 and MAC
* Through Microsoft's digital signature authentication
* In the computer end of the USB device emulation as a standard serial devices Serial COM
* It contains the serial number and identification CH34X monitoring CH34X equipment swap library.
==Feature:==
* Wireless 802.11 b / g / n standard
* Support STA / AP / STA + AP three operating modes
* Built-in TCP / IP protocol stack to support multiple TCP Client connections (5 MAX)D0 ~ D8, SD1 ~ SD3: used as GPIO, PWM, IIC, etc., port driver capability 15mAAD0: 1 channel ADC Power input: 4.5V~9V (10VMAX), USB-powered
* Current: continuous transmission: ≈70mA (200mA MAX), Standby: <200uA
* Transfer rate: 110-460800bps
* Support UART / GPIO data communication interface
* Remote firmware upgrade (OTA)Support Smart Link Smart Networking
* Working temperature: -40 ℃ ~ + 125 ℃
* Drive Type: Dual high-power H-bridge driver
==Instruction & Steps of How to use:==
1. Download the Arduino IDE, the latest version.
2. Install the IDE
3. Set up your Arduino IDE as:
Go to File->Preferences and copy the URL below to get the ESP board manager extensions: arduino.esp8266.com/stable/package_esp8266com_index.json
4. Go to Tools > Board > Board Manager> Type "esp8266" and download the Community esp8266 and install.
5. Set up your chip as:
* Tools -> Board -> NodeMCU 1.0 (ESP-12E Module)
* Tools -> Flash Size -> 4M (3M SPIFFS)
* Tools -> CPU Frequency -> 80 Mhz
* Tools -> Upload Speed -> 921600
* Tools-->Port--> (whatever it is)
6. Download and run the 32 bit flasher exe at Github(Search for nodemcu/nodemcu-flasher/tree/master/ at Github)github.com/nodemcu/nodemcu-flasher/tree/master/Win32/Release Or download and run the 64 bit flasher exe at:
github.com/nodemcu/nodemcu-flasher/tree/master/Win64/Release
7. In Arduino IDE, look for the old fashioned Blink program. Load, compile and upload.
8. Go to FILE> EXAMPLES> ESP8266> BLINK, it will start blinking.
== Data download and firmware link ==
Data download access to the website: : http://www.nodemcu.com/index_en.html
Firmware link: https://github.com/nodemcu/nodemcu-firmware
[[Category:ESP32]]
[[Category:Product Manual]]
<comments/>