5,154
edits
Changes
#Firstly, you can read [https://geekworm.com/community/forum/topic/120764/geekworm-x1001-for-raspberry-pi-5 this post] to get some help;
# Make sure the SSD type you use is correct, only support <span class="tb_red">M.2 NVME Key-M SSD '''</span>NOT support''' M.2 NGFF Key-B SSD. Refer to the following diagram (click it to zoom out): [[File:Supported-SSD-1.jpg|100px]]
# Check that the FFC is fully inserted?Is the HAT tightly connected?We recommend you to send us the FFC connection schematic as well.
# '''Only''' Raspberry Pi OS ('''Bookworm''') supports PCIe, Raspberry Pi OS bullseye is NOT supported, refer to https://www.raspberrypi.com/software/operating-systems/
# Although you can also boot from a SD card, Pi OS is required for the NVMe SSD to boot, DON'T forget Flash OS onto NVMe SSD.