5,154
edits
Changes
#'''Only''' Raspberry Pi OS ('''Bookworm''') supports pcie, Raspberry Pi OS bullseye is NOT supported, refer to https://www.raspberrypi.com/software/operating-systems/
#Although you can also boot from an SD card, but an Pi OS is required for the NVME ssd to work for boot, DON'T forget Flash OS onto NVME SSD
#If you're flashing a fresh PI OS , DON'T forget to '''ENABLE PCIEPCIe'''.
#Run the '''lspci''' or '''lsblk''' command to check the Nvme SSD is recognized?
#Update the firmware, refer to [[#How to update eeprom firmware?]]
#Contact us at email: support@geekworm.com
# Refer to the issue solved by customer: https://geekworm.com/community/forum/topic/120764/geekworm-x1001-for-raspberry-pi-5