Changes

NVMe SSD boot with the Raspberry Pi 5

37 bytes removed, 10:42, 24 December 2023

sudo dd if=/dev/zero of=/dev/nvme0n1 bs=1024 count=1

</pre>

If you are flashing a fresh Pi OS to NVME ssd, you have to [[#Enable PCIe]] after booting the device; if you are COPY or CLONE an old system from SD card to NVME ssd, and you have already enabled pcie in the old OS in advance, then you don't need to do enable pcie operation again!

==Set NVMe early in the boot order==

'''Reboot''' your Raspberry Pi 5 to make the change take effect.

~~<span class="tb_red">'''NOTE:'''</span>~~

If you are flashing a fresh Pi OS to NVME ssd, you have to [[NVMe SSD boot with the Raspberry Pi 5#Enable PCIe]] after booting the device; if you are COPY or CLONE an old system from SD card to NVME ssd, and you have already enabled pcie in the old OS in advance, then you don't need to do enable pcie operation again!

==Upgrade eeprom, solve NO wifi issue==

Harry

Bureaucrats, Comment administrators, Interface administrators, Administrators

5,154

edits