2,869
edits
Changes
# Make sure the SSD type you use is correct, only support <span class="tb_red">M.2 NVME Key-M SSD '''</span>NOT support''' M.2 NGFF Key-B SSD. Refer to:
[[File:Supported-SSD-1.jpg|300px]]
#Make sure all hardware connections are properly connected and coupled.# '''Only''' Raspberry Pi OS ('''Bookworm''') supports PCIe, Raspberry Pi OS bullseye is NOT supported, refer to https://www.raspberrypi.com/software/operating-systems/#Although you can also boot from a SD card, Pi OS is required for the NVMe SSD to boot, DON'T forget Flash OS onto NVMe SSD.#If you're flashing a fresh Pi OS , DON'T forget to '''ENABLE PCIe'''.#Run the '''lspci''' or '''lsblk''' command to check the NVMe SSD is recognized.#Update the firmware, refer to [[#How to update eeprom firmware]]#Contact us at email: support@geekworm.com
# Refer to the issue solved by customer: https://geekworm.com/community/forum/topic/120764/geekworm-x1001-for-raspberry-pi-5