5,154
edits
Changes
A:
#Make sure your physical connections are tight.
#An '''Only''' Raspberry Pi OS ('''Bookworm''') supports pcie, Raspberry Pi OS bullseye is NOT supported, rfer to https://www.raspberrypi.com/software/operating-systems/#Although you can also boot from an SD card, but an Pi OS is required for the NVME ssd to work for boot, DON'T forget Flash OS onto NVME SSD
#If you're flashing a fresh PI OS , DON'T forget to ENABLE PCIE.(Many people will forget this)
#Run the '''lspci''' or '''lsblk''' command to check the Nvme SSD is recognized?