5,095
edits
Changes
Jump to navigation
Jump to search
# Although you can also boot from a SD card, Pi OS is required for the NVMe SSD to boot, DON'T forget Flash OS onto NVMe SSD.
# If you're flashing a fresh Pi OS , DON'T forget to '''ENABLE PCIe'''.
# Run the '''lspci''' or and'''lsblk''' command to check the NVMe SSD is recognized.
# Add '''''PCIE_PROBE=1''''' to the eeprom, (Run 'sudo rpi-eeprom-config --edit' command, then add this line, then press CTRL+O to write change to file, press CTRL+X to exit, then reboot)
# <span class="tb_red">Update the bootloader firmware to the last verson, refer to [[How to update eeprom firmware]], this is very important!!!</span>And finally be sure to run the command ''vcgencmd bootloader_version'' to check if your upgrade was successful!