Open main menu

N500 Front
N500 Back
N500 Antenna Hole 2
N500 Interface
N500 Dimensions
N500 Packing List
N500 Antenna Hole


Contents

Overview

This is a metal case specially designed for Orange Pi Zero 2, we name it as N500. It reserves all the interfaces of the orange pi zero 2 motherboard, supports the 3010 5v cooling fan, supports the extraction of the GPIO cable, and also reserves 2 antenna holes for you to facilitate the installation of external antenna and build-in antenna.

Note: Only compatible with Orange Pi Zero 2, NOT compatible with Orange Pi Zero!!!!

Model Compatible with NVMe SSD Support
N515 Orange Pi 5 Pro / Orange Pi 5 Max Yes, support to mount 2280 length SSD inside the case for Orange Pi 5 Pro
N510 Orange Pi 3B v1.1 only, NOT Orange Pi 3B v2.1 Yes.
N508 Orange Pi 5 Plus Yes.
N506 Orange Pi 5/5B Yes, support to mount 2280 length SSD inside the case for Orange Pi 5.
N505 Orange Pi 5/5B Yes, BUT NOT support to fix 2280 SSD to Case.
N502 Orange Pi Zero 3 No.
N500 Orange Pi Zero 2 No.

Features

  • High quality metal material with surface galvanized process;
  • All ports and slots of the case can match with orange pi zero 2 board perfectly
  • Good heat dissipation, can use 3010 5V active cooling fan and 4pcs passive aluminum heatsink at the same time.
  • Reserved GPIO cable hole
  • 2 antenna holes are reserved to facilitate the installation of external antenna and build-in antenna
  • Case Dimensions: 70 x 57 x 35mm/2.75 x 2.44 x 1.37inch
  • with mounting hole (50mm distance), you can hang it on the wall or somewhere you want.

How to Connect the Cooling Fan

Packing List

  • 1 x N500 Metal Case
  • 1 x 3010 Cooling Fan
  • 1 x 4pcs Aluminum Heatsinks(silver)
  • 4 x KM3*14 screws(for Fan)
  • 4 x M2.5 Copper nuts
  • 4 x M2.5x5+5mm spacers
  • 4 x KM2.5x4mm screws
  • 1 x 4pcs Rubber Pads(black)

User Manual

N500 Installation Video: https://youtu.be/YwuHC2gcyDU

Add your comment
Geekworm Wiki welcomes all comments. If you do not want to be anonymous, register or log in. It is free.