2,862
edits
Changes
Jump to navigation
Jump to search
8
Q: Why the image cuts in and out? (screen flicker )
A: The mainboard LVDS output need to turn off NOSSC and turn on the FREERUN function. The mainboard does not turn off the NOSSC, the frequency is unstable and the screen will flicker.
== FAQ ==
Q: Why the image cuts in and out? (screen flicker )
A: The mainboard LVDS output need to turn off NOSSC and turn on the FREERUN function. The mainboard does not turn off the NOSSC, the frequency is unstable and the screen will flicker.
Q: Why a yellow screen? (a yellow tint; yellow colors;Outputs yellow signal )
A: This is an '''EDID compatibility problem''', because there are too many types of monitor screens on the market, the EDID recognition of different monitors may be wrong, resulting in incorrect colors.(This issue maybe fixed by modify the program.)
Q: Is there a way to reflash the firmware on this board so it turns the Double 8 to a Single 8?
A: The LVDS needs a Stable signal from the motherboard ,so please check your motherboard software,As the blank out issue is because the LVDS output signal of the motherboard is unstable and the frequency is not fixed, so please close the motherboard signal spreading function and turned on the FREERUN fixed frequency function.
<comments/>