Open main menu

LVDS2 Front
LVDS2 Back
LVDS2 PCB Layout
LVDS2 with Cable



Due to the wide variety of screens on the market, the EDID recognition of different screens may have compatibility issues, which may lead to incorrect screen colors or abnormal screens or no display.

This LVDS2 board convert LVDS input signal to HDMI output, the resolution is VESA standard in default. If you need change to single 8 mode, please short the R20 on the LVDS2 board.

Because it is the DIY product, so sometimes there may be the compatibility problem. When it shows no signal or no sound, it may be the compability problem.


  • LVDS input signal to HDMI output, the maximum bandwidth can reach 150MHz;
  • LVDS input interface adopts the general 30-pin socket FI-X30SSLA-HF, which supports dual 8 inputs, and the riginal screen cable can be used directly;
  • Double 8 mode in default
  • I2S sound input in default
  • VESA standard resolution in default
  • 8bit in default
  • Not only supports standard HDMI signals, but also supports other graphics format signals, the common formats are as follows: 1920x1200, 1920x1080, 1600x1200, 1280x1024, 1280x720, etc.
  • Support LVDS signal to spread spectrum
  • Powered by 5V in the screen cable

Packing List

  • 1 x LVDS to HDMI Converter with Cable (cable length: 22cm)

User Manual

CN3/CN4/CN6 Interface Definition


How to Change the Mode


D1&D2 LED Indicator

After power on, D1 flashes,it indicates that the MCU is working normally. After receiving the LVDS signal, D2 is always on.

If D2 is not light on, it means that no LVDS signal is received, and the line sequence needs to be checked.


Add your comment
Geekworm Wiki welcomes all comments. If you do not want to be anonymous, register or log in. It is free.


Anonymous user #5

11 days ago
Score 0  

Is this working with 6bit single 800x480 LVDS ? Can you test it for this resolution?



one day 4 hours 4 minutes ago
Score 0  
Hello, it supports mode:6bits input, solder joint:short R19, but 800x480 has not been tested by us and cannot be tested at present. You can refer to VESA Proposed StandardFile:VESA-Timing-New.pdf

Anonymous user #4

17 days ago
Score 0  
Hello, what is the maximum pixel clock frequency?

Anonymous user #3

18 days ago
Score 0  
Where is EVEN CLOCK signals?

Anonymous user #3

23 days ago
Score 0  
what's mean 'swap' on tp6?

Anonymous user #2

one month ago
Score 0  
What’s the difference between this and v1.5/v20


one month ago
Score 0  
Please refer toLVDS Adapter; v20 has two LVDS signal interfaces.

Anonymous user #1

2 months ago
Score 0  
Is CN4 used for LVDS input or LVDS output?


2 months ago
Score 0  
Hello, This LVDS2 board convert LVDS input signal to HDMI output, does not have LVDS signal output.