1,823
edits
Changes
Jump to navigation
Jump to search
no edit summary
* 1 x Screw Driver
* 1 x Acrylic Bracket
<span style="color:red>Note: The Raspberry Pi 4B motherboard is not included in the packing list.</span>
==FAQ==
'''Q1: Can it be install to my retroflag case?'''
A: No, the dimension is too big.
'''Q2: How many degrees can be decreased ?'''
A: We've tested it at room temperature 25℃, it can decreased about 40℃.
'''Q3: Does it easy to assemble?'''
A: Yes, it is very easy to install, we've provided an instruction for you.
'''Q4: How to install with Raspberry Pi 4 Model B'''
A:
# Fixed the steel mounting fixer to radiator's heat dissipation cube with M2.0 screws
# Fixed the steel mounting fixer to Raspberry Pi 4B’s mounting hole with M2.5 copper stick, and please make sure the heat dissipation is contact to CPU shield properly.
# Fixed the copper stick to Raspberry Pi with M2.5 nuts.
# Connect the red wire to GPIO 5V pin and black wire to GPIO GND pin.
'''Q5: How to install with Raspberry Pi 3 Model B+'''
A:
# Fixed the steel mounting fixer to radiator's heat dissipation cube with M2.0 screws
# Fixed the steel mounting fixer to Raspberry Pi 3B+’s mounting hole with M2.5 copper stick, and please make sure the heat dissipation is contact to CPU shield properly.
# Fixed the copper stick to Raspberry Pi with M2.5 nuts.
# Connect the red wire to GPIO 5V pin and black wire to GPIO GND pin.
==Document==