GPS Module SKU:384916

From Geekworm Wiki
Jump to navigation Jump to search
Raspberry Pi GPS Module SKU:384916

Raspberry Pi GPS Module SKU:384916

Instruction

GPS Module w/ Ceramic Passive Antenna for Raspberry Pi / Arduino 

Features

  • Use U-BLOX NEO-6M modules, high performance;
  • With ceramic antennas;
  • Set parameters via serial port, and can be saved into the EEPROM;
  • Compatible with 3.3V/5V level, easily connect to other single-chip microcomputer system;
  • With backup rechargeable battery, battery can last about half hour after the power is shut down. you can keep the calendar data.

Note: Because the TXD and RXD pin are be connected a 510ohm resistance to compatible with 3.3V/5V, so you need to use the low resistance cable to connect (example: some USB TTL cables will lead to error).

Download Link

Packing List

  • 1 x GPS module
Add your comment
Geekworm Wiki welcomes all comments. If you do not want to be anonymous, register or log in. It is free.