2,869
edits
Changes
no edit summary
==User Manual==
==FAQ==
Q1. The adapter board is connected to the EDP signal, but there is no HDMI output?
Answer:
#Please check whether the EDP cable is connected correctly, differential signal and power supply.
#The power supply voltage should be above 4.5V.
#EDP output to distinguish VESA compliance, refer to point 6.
Q2.The HDMI output picture is normal, but the color of the picture is abnormal?
Answer:
#The data format of the EDP signal does not match the configuration of the adapter board, single 8 or double 8.
#EDP signal board need to adjust program or enter the factory menu to set EDP MAP (VESA or JEIDA).
#The adapter board upgrades the program and reconfigures the parameters.
Q3. The size of the HDMI output picture abnormal or the position shifted?
Answer: The EDP signal board adjusts the EDP parameters strictly according to the VESA standard configuration, refer to point 6 for common resolutions.
Q4. The HDMI output screen jittery, flickering and other unstable phenomena?
A: Focus on checking the EDP signal parameter configuration, turn off the spread spectrum (NOSSC) of EDP output, and turn on the FREERUN function.
<!--Add review function! -->