C296

C296 Packing List

C296 Dimension

C296

C296

C296 installatoin

C296 Applicated on M200

Overview

C296 is a 10mm thickness aluminum alloy heatsink special designed for raspberry pi zero 2 w, it is also compatible with raspberry pi zero w by using thermal pads of different thicknesses (1-1.3mm is ok, better to use 1.3mm).

This radiator adopts a U-shaped groove design to increase the contact area with air, thereby speed up heat dissipation of raspberry pi zero 2 w. And embedded installation design allows user for better DIY extension.

C296 also compatible to use with M200 and its matching aluminum case.

Features

• 10mm thickness embedded Aluminum Heatsink Compatible with Raspberry Pi Zero 2 W / Raspberry pi zero w
• U-shaped groove design to speed up heat dissipation
• Heatsink dimensions: 64x29x10 mm / 2.51x1.14x0.39 inch
• Net weight: 18g/0.04lb

Installation Video

https://youtu.be/RCjjDStUoqw

Packing List

• 1 * 10mm thickness aluminum alloy heatsink (C296)
• 4 * PM2.5*8 screws
• 4 * M2.5 nuts (Black)
• 2 * 6W Thermal Pads （dimensions: 15*30mm, 1mm and 0.5mm thickness)

1mm thermal pad is for CPU part, and 0.5mm thermal pad is for wifi part

FAQ

Add your comment

Geekworm Wiki welcomes all comments. If you do not want to be anonymous, register or log in. It is free.

Sort by date Sort by score

Enable comment auto-refresher

You are ignoring the author of this comment

Show comment | Manage ignore list

Anonymous user #4

3 months ago

Score 0

The Heatsink feet are 0.090" off the surface of the heatsink. the Pi Zero 2017 has CPU about 0.050 and the copper pad was 0.030 think.. so a film of Heatsink compound of 0.005 per side will do it. THe Bluetooth was super tiny, and only 0.010 off the board. so i doubled up the thicker heat sink compound and let it rip. if it overheats, I'll slip in some copper strip between.

Permalink | Reply

You are ignoring the author of this comment

Show comment | Manage ignore list

Walker

3 months ago

Score 0

thank you

Permalink

You are ignoring the author of this comment

Show comment | Manage ignore list

Anonymous user #3

6 months ago

Score 0

Was thermal paste also used between the cpu and the copper plate or only between the copper plate and the heat sink? Do you have data on the differences between the use of the copper plate and the thermal pad?

Permalink | Reply

You are ignoring the author of this comment

Show comment | Manage ignore list

Walker

6 months ago

Score 0

Hello, thermal paste is only used between the copper sheet and the heatsink, relatively speaking, the heat dissipation effect of using copper sheet is better than the use of thermal money

Permalink

You are ignoring the author of this comment

Show comment | Manage ignore list

Anonymous user #2

6 months ago

Score 0

I am curious if this heatsink would work with the orangepi Zero 2W?

Permalink | Reply

You are ignoring the author of this comment

Show comment | Manage ignore list

Walker

6 months ago

Score 0

Hello, we have not tested on orangepi Zero 2W

Permalink

You are ignoring the author of this comment

Show comment | Manage ignore list

Anonymous user #1

12 months ago

Score 0

Please provide more details on what's needed to use this with the Zero W. What thickness pads are required?

Permalink | Reply

You are ignoring the author of this comment

Show comment | Manage ignore list

Walker

12 months ago

Score 0

Hello, we only tested the relevant data of C296 and raspberry pi zero 2 w. We have not tested the thickness pads used by raspberry pi zero w. Currently, we only have data related to raspberry pi zero 2 w

Permalink