5W QI Wireless Charger Transmitter Module

From Geekworm Wiki
Revision as of 18:11, 1 September 2018 by Admin (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

QI Wireless Charger Receiver Module
QI Wireless Charger Receiver Module
QI Wireless Charger Receiver Module


Wireless Charger = Transmitter + Receiver.

To make the wireless charger work, you must have both Transmitter and Receiver at the same time:

1/ if you already have a "receiver": If your phone is Samsung S6 / S7 / Note5, or other cellphone with built-in "receiver", or you already have a "receiver", you just need buy a "Transmitter".

2/ if you already have a "transmitter", then just buy "receiver".

Note: some "transmitters" are not universal, if you have a "receiver", please contact us to check out that if your transmitter is compatible with our receiver or not. Or, there may be some problems when you are trying to built you wireless charger, such as overheat, the charger could not work, ect.


  • Input: DC5V ± 0.25V / 2A, Output: 1A
  • Charging Efficiency: 75%
  • Transmission Distance: 2-8mm
  • Standards: Qi wireless charging standard
  • Size: Boar:2.4cm x 2.2cm x0.25cm; Coil:5cm(diameter)
  • Weight: 0.017kg



Add your comment
Geekworm Wiki welcomes all comments. If you do not want to be anonymous, register or log in. It is free.