42
edits
Changes
Jump to navigation
Jump to search
no edit summary
{{GD Template Impl}}
[[File:X1208-IMG-9926-Interface.jpg|thumb|X1208 V1.0 Interface]]
[[File:X1208-IMG-0087-1.jpg|thumb|X1208 V1.0]]
[[File:X1208-IMG-0088.jpg|thumb|X1208 V1.0]]
[[File:X1208-IMG-0091-1.jpg|thumb|X1208 V1.0]]
[[File:X1208-IMG-0129.jpg|thumb|X1208 V1.0 with Raspberry Pi 5 ]]
[[File:X1208-IMG-0127.jpg|thumb|X1208 V1.0 with Raspberry Pi 5 & SSD card]]
==SAFETY INSTRUCTIONS AND WARNINGS==
* <span style="color:red;">The default charging current is set to 1.5A and charge cut-off voltage is 4.23V. before connecting your battery to the UPS board, Please carefully confirm the maximum charging current and voltage, exceeding the upper limit of the charging specification that the battery can withstand will not only cause adverse reactions, but may also cause irreversible damage.
* Compatible with unprotected 21700 battery only (Max. battery length: 70.3 mm).
|-
|}
==Technical specification==
{| class="wikitable"
|-
| '''Power input''' ||
*5Vdc 5A via USB-C (Input current below 5A may cause improper operation)
|-
| '''UPS output''' ||
*5.1V ±5% Max 5A
|-
| '''Battery charging current''' ||
*1.5A
|-
| '''Terminal Battery Voltage''' ||
*4.23V
|-
| '''Battery Recharge Threshold''' ||
*4.1V
|-
| '''Ports & Connectors''' ||
*USB-C power in connector x1
*1-cell 21700 battery connector x1
*SSD socket - M.2 KEY-M 67P x1
*40-pin extended GPIO header x1
|-
| '''PCB Size''' ||
*86.5mm x 84.5mm
|}
* 4x M2.5x13.5mm F/F Spacers
* 1x Screw Kit
[[File:X1208-IMG-0015-Packing-List.jpg|550px]]
==Matching Case==