Changes

The '''X15-POE1 ''' is a dedicated Power over Ethernet (PoE) Headadd-At-Board on board (HAT) specifically designed for the Raspberry Pi Compute Module 5 (CM5), requiring use when used with either the '''[[X1500 ]]''' or '''[[X1501 ]] '''IO base boardsBoards. Compliant with the IEEE 802.3af/at (PoE+) standardstandards, this board HAT can draw receive up to 25.5W 25W of power from a compatible PoE network switch via . It delivers both reliable operating power and network connectivity to the CM5 through a single Cat5e/Cat6 Ethernet cable, simultaneously providing stable operational power and network connectivity for the CM5.

Featuring an advanced dual-output design, the board supplies 5V power to the CM5 while providing an independent 12V output. This output can drive peripherals such as fans, displays, or motors. This design eliminates reliance on the need for an additional external power suppliessupply, simplifies simplifying system integration, and reduces cable reducing clutter.

* ''' Standard Compliance''': IEEE 802.3af & 802.3at (PoE+)

* '''Input Voltage Range''': 37–57V 36–57V DC

* '''Device Classification''': Class 4

* '''Dual Output Power Rails''':

5V Output: Maximum current DC / 5A (provided 25W max) delivered via the 40-pin GPIO connector)header.

12V Output: Maximum current DC /2.1A (provided 25W max) delivered via a dedicated 2-pin XH2.54 connector).

<span class="tb_red">Note:Total Output Power: Maximum 25W maximum combined output is 25w (5V and 12V outputs cannot simultaneously achieve maximum currentsubject to input power limits).</span>

| Power supply || 3536-57VDC powering over Ethernet

| Power output ||Maximum output current:- 5V 5.1V 2.5A/ 5A- 12V / 21.1A<br /> * |Actual available power depends on the PoE source:- @IEEE 802.3af mode: approximately 12W- 5.1V 5.0A/12V 2.1A @IEEE 802.3at mode: approximately 25W 

| Power output || 5.1V 2.5A / 12V 1.1A @ IEEE 802.3af5.1V 5.0A / 12V 2.1A @ IEEE 802.3at|-| Ports & Connectors || 2x2pin POE female '''PoE input interface''': 2x2-pin header x12x2Opin '''GPIO extended female expansion interface''': 2x20-pin header x1 '''12V output interface''':

2-pin XH2.54 12V output connector x1

* screw pack x1(for securing to IO Hat)[[File:X15-POE1-IMG-0015-Packing-List.jpg|600px]]

* Hardware Installation: [https://suptronics.com/Raspberrypi/cm5/x15-poe1-v1.1_hardware.html* How to make it work:X15-POE1 Hardware]