* The X1008 is designed for data storage purposes and <span style="color:red;">does not currently support booting from HDD/SSD</span> with the existing firmware.
* <span style="color:red;">Don't</span> Please use DC 12V power adapter to power the both X1008 via DC powe jack and the Raspberry Pi5 Pi 5 via USB-C at the same timeDC5521 Jack, no need to power Pi 5 additionally (please note that 3. 5" hard disk requires 12V), recommend [[PSU60 | Geekworm DC 5521 12V 5A Power supply]]
* Older SATA drives with less efficient flash media may not perform as well as newer drives
* New SATA HDDs/SSDs are not partitioned and will need to be both partitioned and formatted when first connected to the Raspberry Pi before they will be accessed in the Explorer.
* Compatible with the official active cooler without compromising cooling performance
* Supports the HAT+ STANDBY power state, automatically turning off SATA devices when the Pi 5 is powered down
* PCB Size: 164.5mm x 101.6mm
==Technical SpecificationHow to Power=='''Power supply:''' <span style="color:red">12Vdc +/-5% ≥3A</span> via DC power jack 5.5x2.1mm, no additional power required to power the Pi 5