3.2 Inch TFT Lcd Touch Screen SKU:340835
Jump to navigation
Jump to search
Contents
Introduction
3.2" TFT Touchscreen Display Module for Raspberry Pi B+&B, 320x240p, 65536 Color Depth, SPI
Features
- Designed for Raspberry Pi, easy to use
- Supports any revision of Raspberry Pi (directly-pluggable)
- Driver provided (works with custom Raspbian directly)
- Supports Raspbian system, enables your system to:
Play videos (supports multi formats, MP4 and so on) Take photos by touching (up to 17 camera modes) Support software keyboard (system interaction without keyboard/mouse)
- High quality immersion gold surface plating
Key Parameters
LCD Type | TFT |
---|---|
LCD Interface | SPI |
Touch Screen Type | Resistive |
Touch Screen Controller | XPT2046 |
Colors | 65536 |
Backlight | LED |
Resolution | 320*240 (Pixel) |
Aspect Ratio | 4:3 |
SPI Diver Speed | 48Mhz |
Backlight Current | TBD |
Operating Temp. (℃) | TBD |
Interface
PIN NO. | SYMBOL | DESCRIPTION |
---|---|---|
1, 17 | 3.3V | Power positive (3.3V power input) |
2, 4 | 5V | Power positive (5V power input) |
3, 5, 7, 8, 10, 22 | NC | NC |
6, 9, 14, 20, 25 | GND | Ground |
11 | TP_IRQ | Touch Panel interrupt, low level while the Touch Panel detects touching |
12 | KEY1 | Key |
13 | RST | Reset |
15 | LCD_RS | LCD instruction control, Instruction/Data Register selection |
16 | KEY2 | KEY |
18 | KEY3 | KEY |
19 | LCD_SI / TP_SI | SPI data input of LCD/Touch Panel |
21 | TP_SO | SPI data output of Touch Panel |
23 | LCD_SCK / TP_SCK | SPI clock of LCD/Touch Panel |
24 | LCD_CS | LCD chip selection, low active |
26 | TP_CS | Touch Panel chip selection, low active |
Learn how to use the lcd
- How to install the image to your pi
- How to use LCD driver
- Touchscreen calibration
- Soft_Virtual keyboard
- Pi-Camera
Documents & Download
- File:LCD-show-160811.tar.gz(Latest Driver)
- Full Image wite driver or Micro Onedrive net disk Download Link
Packing List
- 1 x 3.2 " touch screen
- 1 x Touch Pen
Enable comment auto-refresher
Anonymous user #1
Permalink |
Admin