4 Channel DC Control Solid Relay Module

From Geekworm Wiki
Revision as of 16:50, 1 September 2018 by Admin (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

4 Channel DC Control Solid Relay Module
4 Channel DC Control Solid Relay Module


Overview

4 Channel DC 5V 5A Low Level DC Control Solid Relay Module

Features

  • Anti-Reverse Connection for power supply, fault power supply will not damage the module
  • High-quality 5A DC solid Relay Module
  • Powerful Anti-interference and well performance, only needs 1mA for Trigger Current
  • High level controls, built-in limited resistor. Two ways to control: Anode or SCM I/O port.control
  • Easier KF301 terminal connection
  • With LED indicator

Interface

  • VCC to supply Anode
  • GND connect the Cathode
  • CH: Signal Trigger

Parameters

  • Input Voltage: 5V DC
  • Static Current: 0mA
  • Working Current: 48mA
  • Triggered Way: High Level flip-flops,
DC  0-2.5V Relay Module(ON)
DC 3-5V  Relay Module (OFF)
  • Load Current: 40V DC 5A(DC only)

How to use

Module1.jpg

Packing List

1 x Module

Add your comment
Geekworm Wiki welcomes all comments. If you do not want to be anonymous, register or log in. It is free.


Retrieved from "https://wiki.geekworm.com/index.php?title=4_Channel_DC_Control_Solid_Relay_Module&oldid=6250"