PoE HAT (C)
thumb|X15-POE1 [[|thumb|X15-POE1]] [[|thumb|X15-POE1]] [[|thumb|X15-POE1]] [[|thumb|X15-POE1]]
Overview
PoE HAT (C) is a Power over Ethernet (PoE+) expansion board for Raspberry Pi 3B+/4B , supporting IEEE 802.3af/at network standard. If you have a PoE router or switch that supports the IEEE 802.3af/at network standard, then take me and you only need a network cable to connect to your Raspberry Pi to achieve networking and power supply.
Features
- Based on Raspberry Pi 40pin GPIO interface, suitable for Raspberry Pi 3B+/4B.
- Support PoE power over Ethernet, support IEEE 802.3af/at PoE/PoE+ network standard.
- Using a fully isolated switch mode power supply (SMPS).
- Onboard USB Type A interface, while satisfying the stable power supply of the Raspberry Pi, can also supply power to additional external devices.
- Onboard high-speed active cooling fan for better heat dissipation.
Technical Specification
| POE input voltage | 37V ~ 57V DC input |
| POE-USB Type A output voltage |
5V 4A (MAX) |
| POE-Pin header output voltage | 12V 2A (MAX) |
| Network standard | Support IEEE 802.3af/at PoE/PoE+ |
| Product size | 56.5 × 65mm |
Packing List
- PoE HAT (C) x 1
- Screw pack x 1
FAQ
Q1:Can USB devices be connected to the USB interface on the POE HAT?
A: No, the USB interface on the POE HAT can only output power and has no USB function.
Q2: What is the part number of the matching connector for the 12V plug on the PoE HAT C? Do you sell a cable suitable for connecting to a nearby product?
A: It's 2.54mm Dupont wire.