PSU12V10A

PSU12V10A US

PSU12V10A EU

PSU12V10A UK

PSU12V10A CN

⚠️Important Notes

• Indoor Use Only: This power supply adapter is not waterproof. Please keep it in a dry and well-ventilated environment.

• Match the Voltage: Confirm your device requires a 12V input before connecting. Using a 12V power supply on lower voltage devices (e.g., 5V) will cause permanent damage!

• Current Margin: While it delivers up to 10A, it is recommended to keep continuous loads under 8A (80% rule) for long-term optimal lifespan.

Overview

The 120W Industrial DC Power Supply (12V/10A) is the dedicated power source for compatible X-Series hardware.

It provides regulated, high-current output to ensure stable operation of connected peripherals and system components in demanding application environments.

Features

High Power & Stable Output	120W peak power, continuous 12V 10A output, meets high startup current demands of multiple HDDs. Low ripple & noise supplies clean stable power to safeguard delicate circuits and storage data. High-efficiency conversion cuts heat output and prolongs service life.
Multi-Plug Choices	100–240V universal AC input for global use. Comes with US / EU / UK plugs to fit regional outlets. Standard 5.5×2.1mm DC jack compatible with most peripherals.
Full Industrial Safety Guards	OVP (Over-Voltage Protection): Blocks overvoltage to avoid device damage OCP (Over-Current Protection): Auto power cut when overloaded to eliminate risks SCP (Short-Circuit Protection: Instant power shutdown upon short circuit, protecting adapter and hardware

Compatible Products

XNAS1	Network Attached Storage Devices
X1001-Max	PCIe3.0 M.2 HAT for Raspberry Pi 5
X1008	PCIe3.0 to SATA 2.5+3.5 HDD board for Raspberry Pi 5
X1009	PCIe3.0 to 5 SATA board for Raspberry Pi 5
X1016	PCIe3.0 to 4 M.2 NVMe board for Raspberry Pi 5
X1017	PCIe3.0 to 8 SATA board for Raspberry Pi 5
X1502	CM5 IO board
X1503	CM5 IO board
X1509	CM5 IO board
X1202	4-cell 18650 UPS board for Raspberry Pi 5
X1203	UPS board for Raspberry Pi 5
X1205	2-cell 21700 UPS board for Raspberry Pi 5
X1206 V2.0	4-cell 21700 UPS board for Raspberry Pi 5 (not compatible with X1206 V1.0)

Technical Specification

Input voltage:	100 – 240Vac
Input AC frequency:	50-60Hz
Output voltage:	12Vdc ± 5%
Output current:	10A (120W)
Connector:	Barrel connector, 5.5mm × 2.1mm × 11mm, Centre positive
Cable:	1.5m 16AWG, black
Plug types:	IEC320/C14 ac inlet
Case size:	L:153.5 * W:66.2 * H:32.4mm
Available Plugs:	US Plug / EU Plug / UK Plug (Optional)
Safety Certification:	CE / FCC / RoHS Certified

Packing List

12V 10A DC power supply x1

AC Power Cord (with US, EU, UK plug based on your selection) x1

FAQ

Q1: Question 1

A: Place the answer here.

‎