X630-A3
Overview
PiKVM (https://pikvm.org/) is a very powerful and Open Source Software which allows for a remote connection via your Raspberry Pi to turn on/off or restart your computer, configure the UEFI/BIOS, and even reinstall the OS using the Virtual CD-ROM or Flash Drive. You can use your remote keyboard and mouse or PiKVM can simulate a keyboard, mouse, and a monitor, which are then presented in a web browser as if you were working on a remote system directly. It’s true hardware-level access with no dependency on any remote ports, protocols or services!
X630-A3 is an accessory for PiKVM-A3 (Raspberry Pi 4 based KVM)，the complete kit, please refer to PiKVM
Features
- Designed especially for PiKVM ( Raspberry Pi based KVM over IP)
- Fully compatible with PiKVM OS (refer to user manual)
- Control a server and computer using a web browser
- HDMI Full HD capture based on the TC358743 chip
- OTG Keyboard & mouse; Mass Storage Drive emulation
- Hardware Real Time Clock (RTC) with CR1220 coin battery socket
- Equipped with solidstate relays to protect RPi GPIO pins from computer and ESD spikes
- ATX control via RJ45 connector Switch the machine on or off, reset it, and monitor the status of HDD LED & power LED remotely
- Reserves the 10pin SH1.0 connector on X630-A3 for future I2S HDMI audio support
- Equipped with cooling fan that allows the heat from your Raspberry Pi to dissipate
Packing List
- 1 x X630-A3 HAT Shield for PiKVM-A3
- 1 x USB-A to USB-C OTG Cable (Cable Length: 100cm / 39.37 inch)
- 4 x M2.5x20mm F/F Spacers
- 7 x M2.5x5mm Screws
- 1 x M2.5x10mm Screws
PCB dimention
- X630-A3 Dimensions source file (DXF): File:X630-A3.dxf - You can view it with Autodesk Viewer online
