CommentStreams:997bb3641fd1cbb4ce62a48e4040b76e

After multiple attempts to set it up and power off Raspberry Pi 4 safely with gpio –g mode 6 out and gpio –g write 6 1 does not work (It still changes the value in in gpio readall table, but it does not start the shutdown sequence). I have tried using sudo shutdown now and many other different commands, but it always gets stuck in shutdown (plymouth-poweroff.service, actually its kernel panic that happens, because the power is still supplied to the board after you initiate a sudo shutdown now command). Hopefully geekworm support can help somebody with some actual instructions on what to do if this happens.