CommentStreams:Db5b361b8a7b26c8463e2a2bc38f81c7

Hello, Sorry for the late reply. for the automatically shuts down： 1/Remove all jumper cap, 2/Remove all 18650 battery 3/Place 18650 battery again and wait a few seconds before testing. 4/Please check and confirm if other device occupy the GPIO with X728.

I noticed your steps, please do not supply power through the USB-C port of the RPi.

If your x728 is V1.2 version； Please check if enable the ASD function (shorted the ASD header), if you enable the ASD function, please make sure your operation is right: first, place the battery into the battery holder, insert the jumper to ASD header after 3 seconds,this is very important!!

Still not find out the issue, please attach a video to contact us show more details.