USB-Port-GPS

Overview

The gps module supports raspberry Pi model A, B, A +, B +, Zero, 2,3. USB-Port-GPS module contains CP2102USB serial chip, to communicate through the serial port or USB and raspberry pie. L80 is the integration of Patch Antenna (15.0 × 15.0 × 4.0mm) compact module, with ultra-low power consumption, fast positioning and other advantages, in the acquisition and tracking, making the USB-Port-GPS has a very good performance. Easy to use.

Performance

165 dBm sensitivity, 1Hz (the default), the highest 5Hz update rate data channel 66 Very low current consumption: 20ma PPS output Reserve SMA antenna interface, support for external active antenna for better positioning performance. LED positioning indicator alerts when unlocated PPS long bright light, flashing after positioning. Antenna Dimensions: 15.0 x 15.0 x 4.0 mm Support short circuit protection and detection antenna Support from auxiliary AGPS (EASY technology, the need for external memory support) LOCUS technology: log information is automatically recorded to the internal Flash Supports DGPS, SBAS (WAAS / EGNOS / MSAS / GAGAN)

Feature

Channel: 22 (track) / 66 (capture) Voltage: 3.3-5V The maximum operating current: 100mA GPS Model: L80-39 Antenna size: 15x15x4 (mm) Positioning accuracy: <2.5m CEP Speed accuracy: <0.1 m/s Acquisition sensitivity: -148dm Tracking sensitivity: -165dm The default update rate 1HZ, maximum 5HZ Data format: NMEA0183 protocol Connection: 1 * 8 2.54 pitch pin, USB micro cable Operating temperature: -40 ~ + 85 ℃ @ -130dBm Cold start technology does not use EASY Positioning time <35s @ -130dBm Cold start technology using EASY Positioning time <15s Dimensions: 16.6x26x18.6 (mm)