(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
X1300-A2 V1.0 Wire Connection
X1300-A2 V1.0 with H505 active cooler
X1300-A2 V1.0 with H501 active cooler
Overview
The X1300-A2 is an I2S audio accessory board designed for the X1300 and X630 shield, enabling HDMI audio capture through the I2S interface. It is specifically designed to be placed on top of the Raspberry Pi, similar to a traditional HAT, and it provides a 40-pin header for easy access to the GPIO.
Features
| For use with |
- X1300 HDMI to CSI-2 for Raspberry Pi 5B, CM4 IO board
- X630 HDMI to CSI-2 for Raspberry Pi 4B, 3B+ and 3B
|
| Key Features |
- Enables HDMI audio capture through the I2S interface
- Offers additional advanced functions, including HDMI cable detection, bridge chip reset, and interrupt capabilities
- No soldering or complicated wiring needed
- Ultra-compact design that includes reserved space for installing a CPU heatsink
- Stackable design allows for attachment on bottom of other HATs
- Easily mountable on the Raspberry Pi, allowing you to customize your perfect case
- Supports active cooler up to 11.6mm in height
|
| Technical Specification |
Ports & Connectors:
- GPIO header x1 - 40pin pitch2.54mm
- 10-pin functional connector x1 - 10-pin 1.0pitch
10-pin I2S cable length: 50mm
PCB Size: 65mm x 57mm
|
Packing List
- X1300-A2 V1.0 accessory board x 1
- 10-pin I2S cable x 1
- M2.5* 14.5 F/F Spacers x 3
- M2.5* 5 Screws x 6
- M2.5* 10 Screw x 1
User Manual
FAQ
Enable comment auto-refresher