How to enable SPI

From Geekworm Wiki
Revision as of 19:22, 14 March 2024 by Harry (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

This tutorial demonstrates how to open the SPI interface on the Raspberry Pi 5


1. Open the Raspberry Pi terminal and run the following command 

sudo raspi-config

Rpi5-open-spi-1.png

2. Choose Interfacing Options then press Enter


Rpi5-open-spi-2.png

3. Choose SPI then press Enter


Rpi5-open-spi-3.png

4. Choose YES then press Enter


5. Reboot Raspberry Pi： 

sudo reboot

Please make sure that the SPI interface was not used by other devices, you can check in the /boot/config.txt

Add your comment
Geekworm Wiki welcomes all comments. If you do not want to be anonymous, register or log in. It is free.


Retrieved from "https://wiki.geekworm.com/index.php?title=How_to_enable_SPI&oldid=19206"