X1008
Contents
Overview
Features
- Compatible With Raspberry Pi 5B
- Supports the connection of a 3.5-inch SATA HDD and a 2.5-inch HDD/SSD to your Raspberry Pi 5 simultaneously
- Compliant with the Serial ATA 3.0 specification, with backward compatibility to SATA 2.0 and SATA 1.0
- Adheres to the PCI-Express v2.0 specification and is backward compatible with PCI-Express v1.0
- Supports communication speeds of 5.0 Gbit/s, 3.0 Gbit/s, and 1.5 Gbit/s
- Compatible with SATA 6G, 3G, and 1.5G hard drives
- Features plug-and-play installation for ease of setup
- LED indicators display power and drive status
- Equipped with a high-efficiency DC/DC step-down converter to power both your Raspberry Pi 5 and SATA devices simultaneously
- Efficient power delivery to the Raspberry Pi 5 via pogo pins, consolidating power sources
- On-board push button performs the same actions as the Pi's power button
- Compatible with the official active cooler without compromising cooling performance
- Supports the HAT+ STANDBY power state, automatically turning off SATA devices when the Pi 5 is powered down
Technical Specification
Power supply: 12Vdc +/-5% ≥3A via DC power jack 5.5x2.1mm
PCIe FFC cable length: 37mm
PCB Size: 164.5mm x 101.6mm
Ports & Connectors:
- PCIe connector x1 - 16-pin pitch0.5mm
- SATA connectors x2 - 7+15P
Test & Reviews
Test Conditions
- System board details: Raspberry Pi 5 Model B Rev 1.0 , 4G RAM
- Interface board details: X1008 v1.1 PCIe to 2.5"+3.5" SATA HDD Shield
- Operation system: Raspberry Pi OS with desktop (Debian12 (bookworm), 64bit, Release date: December 5th 2023)
- Storage details: Samsung EVO 750 SSD, Segate Barracuda ST3500410AS 500G
Testing disk drives read speed at PCIe2.0 with hdparm
Samsung EVO SSD: 422.48MB/s, Segate Barracuba HDD: 123.23MB/s
Packing List
- X1008 V1.1 PCIe to SATA shield x1
- PCIe FFC Cable 37mm x1
- Screw pack x1
User Manual
- X1008 hardware description: X1008 Hardware
- X1008 software tutorials: X1008 Software
Enable comment auto-refresher
Anonymous user #1
Permalink |
Lisa