- Power Jack and Connectors
Power input | 5Vdc +/- 5% , ≥3A |
DC Power Plug Size | 5.5*2.5mm |
USB power in socket | Type-C |
UPS power output | 5.1Vdc 8A |
Power output connector | XH2.54mm 2pin |
- X708 powers the Raspberry Pi via the 40-pin header (Pin 2 & 4)
- Don't power the Raspberry Pi via the Pi's type-C USB socket
- X708 can be powered via the onboard DC jack or Type-C USB power socket
Jumper Name | Usage |
---|---|
PLD
(Power loss detection) Pin 1&2 |
|
AON
(Auto power-on) Pin 3&4 |
|
ASD
(Auto shutdown) Pin 5&6 |
1. Battery voltage must be >3Vdc 2. Insert the battery into the holder 3. Wait 3 seconds then insert the jumper 4. If the jumper inserted before battery, remove battery & jumper then repeat step 1, 2 and 3.
|
- How to connector external power switch
Pin No. | Pin Description |
---|---|
1 | Power on/off control connecting to switch |
2 | Ground |
3 | LED+ for battery low indicator |
4 | LED+ for power on, rebooting and shutdown |
Enable comment auto-refresher
Anonymous user #8
Permalink |
Walker
Anonymous user #15
Permalink |
Lisa
Anonymous user #15
Permalink |
Lisa
Anonymous user #16
Lisa
Anonymous user #14
Permalink |
Anonymous user #13
Anonymous user #14
Anonymous user #13
Permalink |
Lisa
Anonymous user #12
Permalink |
Lisa
Anonymous user #10
Permalink |
Lisa
Anonymous user #10
Permalink |
Lisa
Lisa
Anonymous user #10
Lisa
Anonymous user #9
Permalink |
Lisa
Anonymous user #8
Permalink |
Lisa
Anonymous user #7
Permalink |
Anonymous user #3
Permalink |
Anonymous user #4
Anonymous user #5
Anonymous user #5
Xiali
Anonymous user #2
Permalink |
Anonymous user #5
Anonymous user #6
Anonymous user #11
Anonymous user #1
Permalink |