Comments log

Jump to navigation Jump to search

This is a log of comments.

Logs
(newest | oldest) View ( | ) (20 | 50 | 100 | 250 | 500)
  • 13:31, 1 February 2024 38.45.128.198 talk posted a new comment on X1003 (With Corsair M600 1TB: nvme0n1 showed up in my lsblk, but with a size of 1 MB. Doesn't appear to be compatible. I see now that it has a Phison E21T controller, along with almost every other SSD I can find. I'll try the Lexar Play 1TB the other commenter successfully used.)
  • 10:08, 1 February 2024 Walker talk contribs posted a new comment on X1002 (Hi, we haven't tested this SSD, but according to buyers' feedback, the X1002 is compatible with Samsung 970 evo m.e nvme)
  • 10:07, 1 February 2024 Walker talk contribs posted a new comment on X1001 (Thanks for sharing!)
  • 10:05, 1 February 2024 Walker talk contribs posted a new comment on NASPi CM4-M2 (OK, thank you for your interest in our products)
  • 10:03, 1 February 2024 Walker talk contribs posted a new comment on P580 (Hello may I ask what country you are in? It's available in the US right now, and will be available in Europe soon!)
  • 04:22, 1 February 2024 219.250.26.174 talk posted a new comment on X1002 (Does this support PCIe 3.0?) Tags: Mobile web edit, Mobile edit
  • 04:22, 1 February 2024 219.250.26.174 talk posted a new comment on X1002 (Samsung PM981A will work with this?) Tags: Mobile web edit, Mobile edit
  • 22:47, 31 January 2024 69.27.21.151 talk posted a new comment on X1001 (First attempt failed. Had to use the Raspberry Pi eeprom fix and retry. Solution: Make eeprom changes after copying the OS to the SSD. First try would not boot from SD if no OS existed on SSD.)
  • 20:47, 31 January 2024 1.159.18.193 talk posted a new comment on NASPi CM4-M2 (It is all working now. I had inserted the SSD upside-down.)
  • 20:32, 31 January 2024 1.159.18.193 talk posted a new comment on NASPi CM4-M2 (By the way I am using this SATA SSD, Western Digital Blue SA510 1TB M.2 2280 SATA III SSD (WDS100T3B0B))
  • 19:37, 31 January 2024 131.147.76.85 talk posted a new comment on X1003 (Are there any SSDs that have been tested by gekworm? I would like to know that.)
  • 19:13, 31 January 2024 1.159.18.193 talk posted a new comment on NASPi CM4-M2 (Hi, I am using both slots with 1Tb SSDs. The NVME SSD is working but the system does not see the SATA SSD. Is there a special process to set this up? Are there cli commands to debug this? Here are a few dumps. kaza007@pinas:~ $ lsblk NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT mmcblk0 179:0 0 29.1G 0 disk ├─mmcblk0p1 179:1 0 256M 0 part /boot └─mmcblk0p2 179:2 0 28.9G 0 part / mmcblk0boot0 179:32 0 4M 1 disk mmcblk0boot1 179:64 0 4M 1 disk nvme0n1...)
  • 15:21, 31 January 2024 172.58.208.221 talk posted a new comment on P580 (When will Amazon have this item in stock?)
  • 11:17, 31 January 2024 71.121.201.60 talk posted a new comment on X1003 (Using a RPI 5 with Geekworm X1003 and a Lexar Play 1TB NVME m.2 SSD Raspberry Pi Diagnostics - version 0.13 Tue Jan 30 22:11:17 2024 Test : SD Card Speed Test Run 1 prepare-file;0;0;720175;1406 seq-write;0;0;753287;1471 rand-4k-write;0;0;520126;130031 rand-4k-read;263196;65799;0;0 Sequential write speed 753287 KB/sec (target 10000) - PASS Random write speed 130031 IOPS (target 500) - PASS Random read speed 65799 IOPS (target 1500) - PASS Test PASS)
  • 11:13, 31 January 2024 71.121.201.60 talk posted a new comment on X1003 (With Lexar Play 1TB NVME m.2 2230 ssd: Raspberry Pi Diagnostics - version 0.13 Tue Jan 30 22:11:17 2024 Test : SD Card Speed Test Run 1 prepare-file;0;0;720175;1406 seq-write;0;0;753287;1471 rand-4k-write;0;0;520126;130031 rand-4k-read;263196;65799;0;0 Sequential write speed 753287 KB/sec (target 10000) - PASS Random write speed 130031 IOPS (target 500) - PASS Random read speed 65799 IOPS (target 1500) - PASS Test PASS)
  • 10:18, 31 January 2024 Harry talk contribs posted a new comment on How to update eeprom firmware (Hi, <pre> sudo apt update sudo apt upgrade sudo rpi-eeprom-update -a </pre> 1. above commad will update the bootloader to the last versin; 2. Run the '''lspci''' to check the ssd controler manufator. and the '''Phison ''' controler is incompatible.)
  • 10:15, 31 January 2024 Harry talk contribs deleted comment #4346 on How to update eeprom firmware
  • 10:03, 31 January 2024 Walker talk contribs posted a new comment on X1003 (We are now also collecting feedback from our buyers in order to provide it to other buyers)
  • 10:01, 31 January 2024 Walker talk contribs posted a new comment on X1003 (Hi, according to buyer feedback, the Lexar Play M.2 2230 NVMe 1TB SSD is compatible with the X1003)
  • 00:29, 31 January 2024 71.237.126.49 talk posted a new comment on Raspberry Pi 5 Model B (Your site does not allow me to register. I am reporting POSITIVE information/news. I have purchased an rpi5, your nvme shield X1000 v1.5, AND a Sabrent Rocket Nano NVME PCIe Gen3x4 M2 2242 SSD (512 GB). It uses a PHISON PS5013 E13 NVME controller (rev 01). IT WORKS GREAT using dtparam=pci_ex1 (have not tried speeding it up). Hope this info is useful for your database. I noted that you had problems with Phison controllers in the past. Regards, Rick rstiphout@live.com)
  • 22:04, 30 January 2024 131.147.76.85 talk posted a new comment on X1003 (Can you tell us which SSDs you have confirmed to be working properly?)
  • 11:19, 30 January 2024 Harry talk contribs posted a new comment on X1002 (800px)
  • 11:18, 30 January 2024 Harry talk contribs deleted comment #4292 on X1002
  • 11:16, 30 January 2024 Harry talk contribs deleted comment #4267 on X1002
  • 11:15, 30 January 2024 Harry talk contribs deleted comment #4259 on X1002
  • 11:02, 30 January 2024 Walker talk contribs posted a new comment on X306 (Thank you for your trust in our products!)
  • 10:59, 30 January 2024 Walker talk contribs posted a new comment on X1201 (Yes, the x1201 is connected to the Raspberry Pi via pogo pins, no additional wires are needed!)
  • 10:51, 30 January 2024 Harry talk contribs posted a new comment on NVMe SSD boot with the Raspberry Pi 5 (Thanks. Run command: <pre> sudo rpi-eeprom-config --edit </pre> Add PCIE_PROBE=1 line, then press CTRL+O to write change to file, press CTRL+X to exit, then reboot)
  • 10:51, 30 January 2024 Harry talk contribs deleted comment #4348 on NVMe SSD boot with the Raspberry Pi 5
  • 10:51, 30 January 2024 Harry talk contribs deleted comment #4321 on NVMe SSD boot with the Raspberry Pi 5
  • 10:51, 30 January 2024 Harry talk contribs posted a new comment on NVMe SSD boot with the Raspberry Pi 5 (Thanks. Run command: sudo rpi-eeprom-config --edit Add '''PCIE_PROBE=1''' line, then press CTRL+O to write change to file, press CTRL+X to exit, then reboot)
  • 10:12, 30 January 2024 162.221.219.52 talk posted a new comment on X1001 (I reinserted the zif cable and now the WD_Black SN770 shows up on my desktop. However, I don't believe the test is using that drive, it is still terribly slow, like 60 MB/sec. So I think it is using the microSD.)
  • 09:53, 30 January 2024 Walker talk contribs posted a new comment on How to update eeprom firmware (X1003, you can refer to it here:https://wiki.geekworm.com/NVMe_SSD_boot_with_the_Raspberry_Pi_5 Hope it can help you)
  • 09:50, 30 January 2024 162.221.219.52 talk posted a new comment on X1001 (I thought maybe I had just the wrong SSD, but I spent some more money and bought a WD_Black SN770 and though the test in both PCIE 2 and 3 modes give an answer, they are terribly slow and I suspect it is running the test on the microSD card and not the SSD. I don't think this is working at all.)
  • 09:47, 30 January 2024 Walker talk contribs posted a new comment on X728-hardware (Hello, X728 V2.5 is not applicable to Raspberry Pi 5, please refer to UPS series products for Raspberry Pi 5 X1200 X1201 X1202)
  • 09:43, 30 January 2024 Walker talk contribs posted a new comment on X728-Software (Please refer to our new script on the X728:X728-script)
  • 09:43, 30 January 2024 Walker talk contribs posted a new comment on X728-Software (Please refer to our new script on the X728:X728-script)
  • 09:39, 30 January 2024 Walker talk contribs posted a new comment on P579 (Metal cases generally have some degree of impact on WiFi and Bluetooth)
  • 05:45, 30 January 2024 207.173.135.189 talk posted a new comment on P579 (To what extent does this P579 case reduce WiFi and Bluetooth signal strength?)
  • 21:18, 29 January 2024 77.20.74.142 talk posted a new comment on X728-Software (Can the raspberry still be safely restarted with `sudo reboot`?)
  • 11:51, 29 January 2024 Walker talk contribs posted a new comment on X1003 (Hello, you can contact us via our email: '''support@geekworm.com ''' we will do our best to solve your problem（By the way, provide your order number）)
  • 11:49, 29 January 2024 Walker talk contribs posted a new comment on X1003 (Yes, only comes with 2242 fixing screws, if you need to install 2230, you need to prepare your own tools.)
  • 11:49, 29 January 2024 68.61.201.10 talk posted a new comment on X728-Software (Why would it randomly stop shutting down fully? I've tried this firmware and countless others. 2 that use to work. x728off doesnt work.)
  • 11:48, 29 January 2024 Walker talk contribs posted a new comment on P580 (The distance between the X1002 and the bottom of the enclosure is 6mm, so it is recommended that you choose an NVMe cooler that is smaller than 6mm.)
  • 03:58, 29 January 2024 64.135.211.168 talk posted a new comment on X1003 (Is there some reason this should fail to work when using the raspberry pi imager UBUNTU image? i've followed all of the directions i can find here and on the internet and nothing works.)
  • 01:45, 29 January 2024 90.191.18.190 talk posted a new comment on X306 (I was hesitant to buy this product because of some of the comments but I am glad I bought it. It is exactly what I need. I had a spare battery lying around without use, so I needed a UPS hat. The USB hub was a great extra. But, many comments here and reddit posts complained about USB hub not working. I had an impression that it is not working for everyone. But I can confirm, it is working for me. lsusb detects my usb drives (sandisk cruzer blade) and I can mount them. So if you needed a confi...)
  • 18:24, 28 January 2024 77.167.188.242 talk posted a new comment on X1201 (Got it. No need for spacers, or wires. Connects directly to pogo pins on the pi when screwed on.)
  • 18:01, 28 January 2024 77.167.188.242 talk posted a new comment on X1201 (How do you connect the UPS HAT to the raspberry pi? Only screws and spaces are included...)
  • 12:11, 28 January 2024 64.135.211.168 talk posted a new comment on How to update eeprom firmware (sudo lsblk isn't showing the X1003 or the 2230 m-keyed m.2 nvme 512GB kingspec storage i added. neither is sudo lspci. i added the required lines to my raspberry pi 5b /boot/firmware/config.txt file and rebooted. EEPROM claims to be at the latest accordin to sudo rpi-eeprom-update -a . Pretty disappointed. Everything was VERy carefully installed. BOOTLOADER: up to date CURRENT: Mon Sep 25 10:44:03 UTC 2023 (1695638643) LATEST: Mon Sep 25 10:44:03 UTC 2023 (1695638643) RELE...)
  • 11:11, 28 January 2024 64.135.211.168 talk posted a new comment on X1003 (it only comes with the ability to mount a 2242. there is no not supplied for 2230.) Tags: Mobile web edit, Mobile edit
(newest | oldest) View ( | ) (20 | 50 | 100 | 250 | 500)
Retrieved from "https://wiki.geekworm.com/Special:Log/comments"