42
edits
Changes
no edit summary
{{GD Template Impl}}
==SAFETY INSTRUCTIONS AND WARNINGS==
* <span style="color:red;">The default charging current is set to 1.5A and charge cut-off voltage is 4.23V. before connecting your battery to the UPS board, Please carefully confirm the maximum charging current and voltage, exceeding the upper limit of the charging specification that the battery can withstand will not only cause adverse reactions, but may also cause irreversible damage.
* <span style="color:red;">When charging the Battery Pack, please place the battery in a fireproof container. Do not leave the UPS shield on wood material or carpet unattended.
* <span style="color:red;">Keep the UPS shield away from children to ensure their safety.
==Overview==
The X1208 UPS+M.2 NVMe Shield is engineered to provide the Raspberry Pi 5 with both a reliable power source and enhanced storage. It features an integrated M.2 NVMe SSD slot, ensuring robust data backup even during a power loss. This powerful combination safeguards valuable data, boosts system reliability, and guarantees continuous operation.
The X1208 delivers a stable 5.1 V/5 A backup power supply, enabling uninterrupted performance for demanding setups—from intensive applications to multiple peripherals. Its advanced power-management system intelligently monitors the Pi's status, automatically cutting power after shutdown to optimize battery life with ultra-low standby consumption. The board ensures seamless power switching during outages or adapter failures and supports convenient features such as auto power-on and AC power-loss detection.
{{Raspberry Pi 5 UPS Sets}}
==Features==
| '''Key Features''' ||
'''UPS Output'''
* Built for continuous, long-lasting operation -providing unwavering power for always-on Raspberry Pi 5 systems* Supports a maximum current output of 5.1V 5000mA, suitable for most Raspberry Pi 5 applications
* Integrated Advanced Power MOSFET with an equivalent of 7mΩ RDS(ON) to minimize power loss
* Power the Pi 5 directly through the 40-pin header, eliminating the need for cables and soldering
'''Battery Charging'''
* Integrated Maxim's fuel-gauge systems for reading battery voltage and percentage over I2C
* On-board LEDs indicate battery charging and discharging levels of 25%, 50%, 75%, and 100%
* Features '''a single 21700 battery holder''', supporting a battery of up to 5000mAh(Compatible only with '''unprotected 21700 battery''' up to 70.3 mm in length.)
'''Power Input'''
* Seamless power switching between backup power and the power adapter
* On-board push button performs the same actions as the Pi's power button
* Automatically cuts off power when the Pi 5 is shut down* On-board LED indicates power status and Pi 5 detection
* AC power loss and power adapter failure detection via GPIO
* Auto power-on when power is applied or restored
'''Compatible Accessories'''
* [[X1100 ]] USB3 to SATA 2.5 HDD/SSD shield for Pi 5* Other add-on boards that do not use the PCIe interface are attached to the bottom of the Raspberry Pi5.
|-
| '''Spec''' ||
* 40-pin extended GPIO header x1
'''PCB Size:''' 86.5mm x 84.5mm
|-
|''' Important Notes'''||* Do not apply power to your Raspberry Pi 5 via the Type-C USB socket.* Compatible with unprotected 21700 battery only (Max. battery length: 70.3 mm).
|-
|}
==Technical specification==
{| class="wikitable"
|-
| '''Power input''' ||
*5Vdc 5A via USB-C (Input current below 5A may cause improper operation)
|-
| '''UPS output''' ||
*5.1V ±5% Max 5A
|-
| '''Battery charging current''' ||
*1.5A
|-
| '''Terminal Battery Voltage''' ||
*4.23V
|-
| '''Battery Recharge Threshold''' ||
*4.1V
|-
| '''Ports & Connectors''' ||
*USB-C power in connector x1
*1-cell 21700 battery connector x1
*SSD socket - M.2 KEY-M 67P x1
*40-pin extended GPIO header x1
|-
| '''PCB Size''' ||
*86.5mm x 84.5mm
|}
* 4x M2.5x13.5mm F/F Spacers
* 1x Screw Kit
[[File:X1208-IMG-0015-Packing-List.jpg|550px]]
==Matching Case==
There is no matching case for X1208 right now! Please looking forward to the future update.
==User Manual==
* X1208 Hardware InstallationGuide: [https://suptronics.com/Raspberrypi/Power_mgmt/x1208-v1.0_hardware.html X1208 Hardware]* How to make it workX1208 Software Guide:[https://suptronics.com/Raspberrypi/Power_mgmt/x120x-v1.0_software.html X1208 Software]
==FAQ==