5,670
edits
Changes
no edit summary
{{GD Template Impl}}
Here is a tutorial on how to update eeprom, OR you can also refer to official documention: https://www.raspberrypi.com/documentation/computers/raspberry-pi.html#automatic-updates
'''1. Firstly check the bootloader version'''
vcgencmd bootloader_version
Maybe the result is following:
<pre>
pi@raspberrypi:~ $ vcgencmd bootloader_version
2024/05/17 12:29:43
version 72caf66729df313801bcefe9b1ff7099c71bb5ce (release)
timestamp 1715945383
update-time 1716260490
capabilities 0x0000007f
</pre>
'2024/05/17' is the firmware version;
https://github.com/raspberrypi/rpi-eeprom/blob/master/firmware-2712/release-notes.md
'''2. Update to the latest version (recommended)'''
Before starting the update, make sure raspberry pi 5 is connected to the Internet;
You can refer to the official document: [https://www.raspberrypi.com/documentation/computers/raspberry-pi-5.html#updating-your-firmware update firmware] or following steps:
* Update via command:
sudo apt update
sudo apt upgrade -y
sudo rpi-eeprom-update
If a firmware update is available you will be prompted to install it and your Raspberry Pi will reboot. More information about updating the firmware on your Raspberry Pi is available in the [https://www.raspberrypi.com/documentation/computers/raspberry-pi-5.html#updating-your-firmware official documentation].
* Use tool '''raspi-config''' to update
sudo raspi-config
Then select '''6 Advanced Opitions''' => '''A5 Bootloader Version''' => '''E1 Latest''', answere '''Yes'''）
Then <code>reboot</code> and the firmware will be updated (requires Internet access).
'''3. Update to specified version''' (Not recommended)
At some point, you may need to update to a specified version (you almost never need to use it now). You can refer to the following command. Visit [https://github.com/timg236/rpi-eeprom/tree/master/firmware-2712/default this link] to view firmware version history.
wget https://github.com/timg236/rpi-eeprom/raw/pieeprom-2023-10-30-2712/firmware-2712/default/pieeprom-2023-10-30.bin
sudo rpi-eeprom-config --edit pieeprom-2023-10-30.bin
If your wget download file fails, please directly click [[File:Pieeprom-2023-10-30.zip]] download it then unzip it (run '''''unzip pieeprom-2023-10-30.zip''''') to get <big>pieeprom-2023-10-30.bin</big> file.
PS: You can replace the 'pieeprom-2023-10-30.bin ' to you specified version file.
[[File:Update-eeprom.png]]
'''4. Check if the update was successful'''
After restarting, run the '''vcgencmd bootloader_version''' command again to view the firmware version and check whether the update is successful.
<!--Add review function! -->
<comments />
<!--Please choose the -->
<!--Remove other categories, just keep the appropriate categories -->
[[Category:Product Manual]]
[[Category:Raspberry pi]]
[[Category:Knowledge]]
Here is a tutorial on how to update eeprom, OR you can also refer to official documention: https://www.raspberrypi.com/documentation/computers/raspberry-pi.html#automatic-updates
'''1. Firstly check the bootloader version'''
vcgencmd bootloader_version
Maybe the result is following:
<pre>
pi@raspberrypi:~ $ vcgencmd bootloader_version
2024/05/17 12:29:43
version 72caf66729df313801bcefe9b1ff7099c71bb5ce (release)
timestamp 1715945383
update-time 1716260490
capabilities 0x0000007f
</pre>
'2024/05/17' is the firmware version;
https://github.com/raspberrypi/rpi-eeprom/blob/master/firmware-2712/release-notes.md
'''2. Update to the latest version (recommended)'''
Before starting the update, make sure raspberry pi 5 is connected to the Internet;
You can refer to the official document: [https://www.raspberrypi.com/documentation/computers/raspberry-pi-5.html#updating-your-firmware update firmware] or following steps:
* Update via command:
sudo apt update
sudo apt upgrade -y
sudo rpi-eeprom-update
If a firmware update is available you will be prompted to install it and your Raspberry Pi will reboot. More information about updating the firmware on your Raspberry Pi is available in the [https://www.raspberrypi.com/documentation/computers/raspberry-pi-5.html#updating-your-firmware official documentation].
* Use tool '''raspi-config''' to update
sudo raspi-config
Then select '''6 Advanced Opitions''' => '''A5 Bootloader Version''' => '''E1 Latest''', answere '''Yes'''）
Then <code>reboot</code> and the firmware will be updated (requires Internet access).
'''3. Update to specified version''' (Not recommended)
At some point, you may need to update to a specified version (you almost never need to use it now). You can refer to the following command. Visit [https://github.com/timg236/rpi-eeprom/tree/master/firmware-2712/default this link] to view firmware version history.
wget https://github.com/timg236/rpi-eeprom/raw/pieeprom-2023-10-30-2712/firmware-2712/default/pieeprom-2023-10-30.bin
sudo rpi-eeprom-config --edit pieeprom-2023-10-30.bin
If your wget download file fails, please directly click [[File:Pieeprom-2023-10-30.zip]] download it then unzip it (run '''''unzip pieeprom-2023-10-30.zip''''') to get <big>pieeprom-2023-10-30.bin</big> file.
PS: You can replace the 'pieeprom-2023-10-30.bin ' to you specified version file.
[[File:Update-eeprom.png]]
'''4. Check if the update was successful'''
After restarting, run the '''vcgencmd bootloader_version''' command again to view the firmware version and check whether the update is successful.
<!--Add review function! -->
<comments />
<!--Please choose the -->
<!--Remove other categories, just keep the appropriate categories -->
[[Category:Product Manual]]
[[Category:Raspberry pi]]
[[Category:Knowledge]]