2,917
edits
Changes
no edit summary
-----
'''Geekworm HDMI to CSI Module Series:'''
Convert HDMI signal acquisition into CSI signal and I2S audio signal. '''The maximum capture resolution depends on the <mark>HDMI to CSI converter board</mark> as well as the <mark>Raspberry Pi</mark> hardware'''.
Raspberry Pi hardware are primarily divided into two series, one supporting a maximum of 1080P60Hz and the other supporting a maximum of 1080P50Hz.
* Raspberry Pi versions that support up to 1080P'''60Hz''': CM3, CM4, Pi 5B
* Raspberry Pi versions that support up to 1080P'''50Hz''': zero, zero2, Pi3B, Pi4B, etc.
{| class="wikitable"
! Picture !! Model !! Description !! Max Input Resolution !! I2S Audio !! HDMI Capture Chip !! PCB Dimension !! CSI-2 Connector !! Supported SOC
|-
| [[File:C779-Packing-List.jpg|150px]] || [[C779]] || HDMI to CSI-2 || 1080p50fps || NO || Toshiba TC358743XBG || 35 x 50 mm || 15-PIN FPC (pitch 1.0 mm) || Pi 5B / 4B / 3B+ / 3B / 3A+ / Zero / Zero W/ Zero 2W
|-
| [[File:C790-Packing-List.jpg|150px]] ||[[C790]] || HDMI to CSI-2 || 1080p'''60fps''' || <span class="tb_red">Yes</span> || Toshiba TC358743XBG || 30 x 45 mm ||
* 15-PIN FPC (pitch 1.0 mm) on the front of C790;
* 22-PIN FPC (pitch 0.5 mm) on the rear of C790
||Pi 5B / 4B / 3B+ / 3B / 3A+ / Zero / Zero W/ Zero 2W / CM3 / CM4
|-
| [[File:X630-Packing-List.jpg|150px]]|| [[X630]] ||HDMI to CSI-2||1080p50fps||<span class="tb_red">Yes</span>, but I2S wiring or the [[X1300-A2]] accessory board is necessary||Toshiba TC358743XBG||30 x 42.4 mm||15-PIN FPC (pitch 1.0 mm)||4B / 3B+ / 3B / 3A+ / Zero W / Zero 2W
|-
| [[File:X1300-V1.0-IMG-7645-Packing List.jpg|150px]]|| [[X1300]] ||HDMI RX to MIPI CSI-2-TX||1080p'''60fps'''||<span class="tb_red">Yes</span>, but I2S wiring or the [[X1300-A2]] accessory board is necessary||Toshiba TC358743XBG||30 x 37.5 mm||22-PIN FPC (pitch 0.5 mm)||Pi 5B / CM4 IO
|-
| [[File:X1301-V1.1-IMG-8060-Packing-List.jpg|150px]] ||[[X1301]]||HDMI RX to MIPI CSI-2-TX HDMI loop output||1080p'''60fps'''||<span class="tb_red">Yes</span>||Toshiba TC358743XBG||57 x 85.5 mm||22-PIN FPC (pitch 0.5 mm)||Pi 5B / 4B / 3B / 3B+ / 3A+ / CM4 IO
|-
| [[File:X1300-A2-IMG-8370-acce-1.jpg|150px]] ||[[X1300-A2]]||I2S audio accessory board for [[X630]] / [[X1300]]||1080p'''60fps'''||This is a I2S audio accessory board||-||57 x 65 mm||-||
* work with [[X1300]] HDMI to CSI-2 for Raspberry Pi 5B, CM4 IO board
* work with [[X630]] HDMI to CSI-2 for Raspberry Pi 4B, 3B+ and 3B
|}
'''Geekworm HDMI to CSI Module Series:'''
Convert HDMI signal acquisition into CSI signal and I2S audio signal. '''The maximum capture resolution depends on the <mark>HDMI to CSI converter board</mark> as well as the <mark>Raspberry Pi</mark> hardware'''.
Raspberry Pi hardware are primarily divided into two series, one supporting a maximum of 1080P60Hz and the other supporting a maximum of 1080P50Hz.
* Raspberry Pi versions that support up to 1080P'''60Hz''': CM3, CM4, Pi 5B
* Raspberry Pi versions that support up to 1080P'''50Hz''': zero, zero2, Pi3B, Pi4B, etc.
{| class="wikitable"
! Picture !! Model !! Description !! Max Input Resolution !! I2S Audio !! HDMI Capture Chip !! PCB Dimension !! CSI-2 Connector !! Supported SOC
|-
| [[File:C779-Packing-List.jpg|150px]] || [[C779]] || HDMI to CSI-2 || 1080p50fps || NO || Toshiba TC358743XBG || 35 x 50 mm || 15-PIN FPC (pitch 1.0 mm) || Pi 5B / 4B / 3B+ / 3B / 3A+ / Zero / Zero W/ Zero 2W
|-
| [[File:C790-Packing-List.jpg|150px]] ||[[C790]] || HDMI to CSI-2 || 1080p'''60fps''' || <span class="tb_red">Yes</span> || Toshiba TC358743XBG || 30 x 45 mm ||
* 15-PIN FPC (pitch 1.0 mm) on the front of C790;
* 22-PIN FPC (pitch 0.5 mm) on the rear of C790
||Pi 5B / 4B / 3B+ / 3B / 3A+ / Zero / Zero W/ Zero 2W / CM3 / CM4
|-
| [[File:X630-Packing-List.jpg|150px]]|| [[X630]] ||HDMI to CSI-2||1080p50fps||<span class="tb_red">Yes</span>, but I2S wiring or the [[X1300-A2]] accessory board is necessary||Toshiba TC358743XBG||30 x 42.4 mm||15-PIN FPC (pitch 1.0 mm)||4B / 3B+ / 3B / 3A+ / Zero W / Zero 2W
|-
| [[File:X1300-V1.0-IMG-7645-Packing List.jpg|150px]]|| [[X1300]] ||HDMI RX to MIPI CSI-2-TX||1080p'''60fps'''||<span class="tb_red">Yes</span>, but I2S wiring or the [[X1300-A2]] accessory board is necessary||Toshiba TC358743XBG||30 x 37.5 mm||22-PIN FPC (pitch 0.5 mm)||Pi 5B / CM4 IO
|-
| [[File:X1301-V1.1-IMG-8060-Packing-List.jpg|150px]] ||[[X1301]]||HDMI RX to MIPI CSI-2-TX HDMI loop output||1080p'''60fps'''||<span class="tb_red">Yes</span>||Toshiba TC358743XBG||57 x 85.5 mm||22-PIN FPC (pitch 0.5 mm)||Pi 5B / 4B / 3B / 3B+ / 3A+ / CM4 IO
|-
| [[File:X1300-A2-IMG-8370-acce-1.jpg|150px]] ||[[X1300-A2]]||I2S audio accessory board for [[X630]] / [[X1300]]||1080p'''60fps'''||This is a I2S audio accessory board||-||57 x 65 mm||-||
* work with [[X1300]] HDMI to CSI-2 for Raspberry Pi 5B, CM4 IO board
* work with [[X630]] HDMI to CSI-2 for Raspberry Pi 4B, 3B+ and 3B
|}