2,960
edits
Changes
X710
,{{GD Template Impl}}
[[File:X710.jpg|thumb|right|X710 Power Management Board]]
[[File:接口示意图.jpg|thumb|right|X710 Power Management Board]]
[[File:X710-1.jpg|thumb|right|X710 Power Management Board]]
[[File:X710-2.jpg|thumb|right|X710]]
==Overview==
The X710 is a power management expansion board for all current models of the Raspberry Pi using a 40-pin header. It provides 5A of continuous output current over a wide 6V to 36V operating input range with excellent load and line regulation，intelligent and safe power management, safe shutdown and full poweroff through software, and a low noise cooling fan which enables the use of the Raspberry Pi in extreme conditions including very high temperature environments. The X710 also reserves the 40-pin header that can be stacked with other Raspberry Pi accessory boards for enhanced applications.
Note: [[X710]] does not support Raspberry Pi 5.
==Features==
{| class="wikitable"
|-
! FOR USE WITH !! Raspberry Pi 4 Model B/ Raspberry Pi 3 Model B+/Raspberry Pi 3 Model B/Raspberry Pi 2 Model B/Raspberry Pi 1 Model B+
|-
| OPERATING SYSTEM || - Raspbian Stretch
- Safe shutdown function tested for Raspbian, other operating systems to be tested and advised
|-
| KEY FEATURES ||
* - Ideal power management solution for Raspberry Pi
* - Integrated high-efficiency step-down DC-DC converter
* - Wide 6V to 36V operating input range
* - 5A continuous output current
* - High efficiency up to 90%
* - On-board DC jack and XH2.54 connector for power input
* - Power output via XH2.54 connector and the 40-pin header
* - Intelligent and safe power management
* - Equipped with momentary button switch for easy power control
* - Press the button to turn on
* - Press the button and hold for 1~2seconds to reboot
* - Press the button and hold for 3~7seconds to implement safe shutdown
* - Press the button and hold for >8seconds to force shutdown
* - Supports safe shutdown and full poweroff through software
* - Integrated high-performance MOSFET power switch allows continuous drain current up to 17A
* - On-board LED shows the status of power on, reboot and shutdown
* - On-board PH2.0 connectors allows to use external latching switch or momentary button
* - Powers the Raspberry Pi via the 40-pin header - no additional cabling required
* - 30mm x 30mm low noise fan for processor cooling
* Reserved camera slot and display cutout - Both can still be used with X710 attached
* - Reserved 40-pin stackable Header for Add-On Boards
* - Works with all current models of the Raspberry Pi using a 40 pin header
* - Fully compatible with [[X820]],[[X850]], [[X860]], [[X870]], [[X822]], [[X852]], [[X825]], [[X828]], [[X855]], [[X856]], [[X857]], but there is no match metal case for them
|-
| SPECIFICATION ||
* - Power supply: 6~36Vdc ≥ 2A
* - Output: 5V 5%, Max 5A
* - DC power jack : 5.5*2.5mm, Positive Tip
* - Board size: 65 x 57mm
|-
| NOTES ||
* - Full poweroff through software is not supported when using external latching power switch
* - Don't connect any 5V-powered device to XH2.54 power input connector.
* - Do not apply power to your Raspberry Pi via the Pi's Micro-USB socket or type C socket
|-
|}
==Packing List==
*X710 Power mgt Board x 1
*Screw M2.5 *5mm x 8
*Spacer M/F M2.5 *12mm x 4
*Spacer F/F M2.5 *12mm x 4
*Jumper x 2
==Document==
* X710 Dimensions source file (DXF): [[File:X710-PCB-v1.dxf|X70 Dimensions source file (DXF)]] - You can view it with [https://viewer.autodesk.com/ Autodesk Viewer] online
For the script, please refer to [http://www.suptronics.com/miniPCkits/x710-software.html Software Guide]
[[File:接口示意图.jpg|800px|X710]]
[[File:功能说明-1500x1500.jpg|800px|X710]]
Please refer to here about the PH2.0 connector details: [[File:PH2.0 connector specifications.pdf|thumb|PH2.0 connector specifications]]
==Installation Guide==
[[File:安装说明-1500x1500.jpg|800px|X710]]
==FAQ==
<!--增加评论功能！ -->
<comments />
<!--请选择合适的分类，多余的分类请删除； -->
[[Category:Product Manual]]
[[Category:Raspberry pi]]
[[File:X710.jpg|thumb|right|X710 Power Management Board]]
[[File:接口示意图.jpg|thumb|right|X710 Power Management Board]]
[[File:X710-1.jpg|thumb|right|X710 Power Management Board]]
[[File:X710-2.jpg|thumb|right|X710]]
==Overview==
The X710 is a power management expansion board for all current models of the Raspberry Pi using a 40-pin header. It provides 5A of continuous output current over a wide 6V to 36V operating input range with excellent load and line regulation，intelligent and safe power management, safe shutdown and full poweroff through software, and a low noise cooling fan which enables the use of the Raspberry Pi in extreme conditions including very high temperature environments. The X710 also reserves the 40-pin header that can be stacked with other Raspberry Pi accessory boards for enhanced applications.
Note: [[X710]] does not support Raspberry Pi 5.
==Features==
{| class="wikitable"
|-
! FOR USE WITH !! Raspberry Pi 4 Model B/ Raspberry Pi 3 Model B+/Raspberry Pi 3 Model B/Raspberry Pi 2 Model B/Raspberry Pi 1 Model B+
|-
| OPERATING SYSTEM || - Raspbian Stretch
- Safe shutdown function tested for Raspbian, other operating systems to be tested and advised
|-
| KEY FEATURES ||
* - Ideal power management solution for Raspberry Pi
* - Integrated high-efficiency step-down DC-DC converter
* - Wide 6V to 36V operating input range
* - 5A continuous output current
* - High efficiency up to 90%
* - On-board DC jack and XH2.54 connector for power input
* - Power output via XH2.54 connector and the 40-pin header
* - Intelligent and safe power management
* - Equipped with momentary button switch for easy power control
* - Press the button to turn on
* - Press the button and hold for 1~2seconds to reboot
* - Press the button and hold for 3~7seconds to implement safe shutdown
* - Press the button and hold for >8seconds to force shutdown
* - Supports safe shutdown and full poweroff through software
* - Integrated high-performance MOSFET power switch allows continuous drain current up to 17A
* - On-board LED shows the status of power on, reboot and shutdown
* - On-board PH2.0 connectors allows to use external latching switch or momentary button
* - Powers the Raspberry Pi via the 40-pin header - no additional cabling required
* - 30mm x 30mm low noise fan for processor cooling
* Reserved camera slot and display cutout - Both can still be used with X710 attached
* - Reserved 40-pin stackable Header for Add-On Boards
* - Works with all current models of the Raspberry Pi using a 40 pin header
* - Fully compatible with [[X820]],[[X850]], [[X860]], [[X870]], [[X822]], [[X852]], [[X825]], [[X828]], [[X855]], [[X856]], [[X857]], but there is no match metal case for them
|-
| SPECIFICATION ||
* - Power supply: 6~36Vdc ≥ 2A
* - Output: 5V 5%, Max 5A
* - DC power jack : 5.5*2.5mm, Positive Tip
* - Board size: 65 x 57mm
|-
| NOTES ||
* - Full poweroff through software is not supported when using external latching power switch
* - Don't connect any 5V-powered device to XH2.54 power input connector.
* - Do not apply power to your Raspberry Pi via the Pi's Micro-USB socket or type C socket
|-
|}
==Packing List==
*X710 Power mgt Board x 1
*Screw M2.5 *5mm x 8
*Spacer M/F M2.5 *12mm x 4
*Spacer F/F M2.5 *12mm x 4
*Jumper x 2
==Document==
* X710 Dimensions source file (DXF): [[File:X710-PCB-v1.dxf|X70 Dimensions source file (DXF)]] - You can view it with [https://viewer.autodesk.com/ Autodesk Viewer] online
For the script, please refer to [http://www.suptronics.com/miniPCkits/x710-software.html Software Guide]
[[File:接口示意图.jpg|800px|X710]]
[[File:功能说明-1500x1500.jpg|800px|X710]]
Please refer to here about the PH2.0 connector details: [[File:PH2.0 connector specifications.pdf|thumb|PH2.0 connector specifications]]
==Installation Guide==
[[File:安装说明-1500x1500.jpg|800px|X710]]
==FAQ==
<!--增加评论功能！ -->
<comments />
<!--请选择合适的分类，多余的分类请删除； -->
[[Category:Product Manual]]
[[Category:Raspberry pi]]