Open main menu
Geekworm Wiki

Install driver to 7 inch Cap Lcd 800*480

Contents

Use Driver for this 7inch cap HD lcd

Connect the LCD

 

  • USB Touch/Power Interface: USB touch/power interface.
  • HDMI: it is used for connecting the main board to the LCD screen.

Drive the LCD

Use our Image that we have configured;
B/A+/B+-Raspbian 
PI2-Raspbian 
PI2-Ubunutu_lxde

Install driver at yourself Raspbian OS

Copy & unzip file

  • B/A+/B+--Raspbian:
Copy the file into the Raspbian system, and unzip it. enter the terminal and input the following command: 
sudo tar zxvf RPI_B_B+_USB_TOUCH_CAP_RASPBIAN-3.18.16-7.0-1024x600-20150806.tar.gz
  • PI2--Raspbian:
Copy the file into the Raspbian system, and unzip it. enter the terminal and input the following command: 
sudo tar zxvf RPI_2B_USB_TOUCH_CAP_RASPBIAN-3.18.16-v7-7.0-1024x600-20150806.tar.gz

Enable the RPi USB power output MAX

 sudo nano /boot/config.txt

 #add the follow line：
 max_usb_current=1

Run script

  • B/A+/B+--Raspbian:
cd RPI_B+_USB_TOUCH_CAP_RASPBIAN-3.18.16-7.0-1024x600-20150806
sudo ./USB_TOUCH_CAP_7.0_RASPBIAN
  • PI2--Raspbian:
cd RPI_2B_USB_TOUCH_CAP_RASPBIAN-3.18.16-v7-7.0-1024x600-20150806
sudo ./USB_TOUCH_CAP_7.0_RASPBIAN

Reboot

  • When finished, the system will reboot automatically. And the LCD module can work properly, including display and touch functions, after the system rebooted.
Retrieved from "https://wiki.geekworm.com/index.php?title=Install_driver_to_7_inch_Cap_Lcd_800*480&oldid=971"